Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand cabinet member from Knape & Vogt's 1805 series — an 18 inch (450mm nominal), white epoxy-coated, self-closing, 3/4-extension roller slide component, sold as a single right-hand piece for side-mount installation in kitchen, vanity, and closet cabinetry.
Production shops and refacing contractors who standardize on white-interior cabinets buy 1805 members by the piece so they can stock and pull exactly what each drawer needs. This right-hand cabinet member screws to the right side of the cabinet interior and pairs with its left-hand mate and both drawer members to run a single drawer. It suits kitchen drawers, bathroom vanity cases, and closet built-ins where the white epoxy finish disappears against a white melamine panel — the typical interior in residential production work. The 18 inch length (450mm nominal) is the right call when cabinet depth calls for a slide in that size class.
Steel construction with a baked white epoxy powder-coat keeps the member rigid under load and color-consistent with other 1805 white components. The epoxy is a finish and color choice, not a structural upgrade — its job is to make the slide blend rather than stand out inside the box. Roller bearings provide smooth, quiet travel suited to the everyday open-and-close cycles of residential cabinetry. The self-closing ramp is built into the member: a positive, undamped close that pulls the drawer home once it enters the capture zone. This is self-close, not soft-close — the drawer seats firmly, without a slowed landing.
Cabinet shops running high-volume production lines order handed members individually because a shop doing 50 drawers a day needs to restock the pieces that actually run out — not pay for a matched set when one side wears faster or gets damaged. Refacing and replacement crews use the same logic: if the right-hand cabinet member is the problem, the fix is a right-hand cabinet member, not a full new set. This Q-Pack listing is aimed at that production and replacement volume; confirm the pack count for your order before adding to cart.
One drawer takes a left-hand cabinet member, this right-hand cabinet member, and both a left-hand and right-hand drawer member — four pieces total. Two right-hand members will not form a working set.
No. The 1805's self-close works on a mechanical ramp that pulls the drawer fully shut once it enters the capture zone. There is no damper, so the close is positive rather than slowed. Soft-close is a separate, damped feature this slide does not include.
The 1805 series catalogs in metric nominal lengths; this 18 inch member is the 450mm size. Match the nominal length to your drawer depth when sizing.
In a face-frame cabinet the cabinet side is set back from the frame, so the slide's back end needs rear support. Add the matching 1805 series rear mounting brackets or sockets — sold separately — to support the member in face-frame construction.
Allow 1/2 inch of side clearance per side. Build the drawer box 1 inch narrower than the inside cabinet opening, and keep drawer width at or under the 1805 series maximum of 18 inches.
When the job calls for a white cabinet interior and a self-closing Euro slide at a production pace, ordering the right-hand 1805 member by the piece keeps the line moving without tying up inventory in parts you don't need.
Sold In: 100 Each
