Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand cabinet member from Knape and Vogt's 1805 series — an 18 inch (450mm nominal), white epoxy-coated, self-closing, 3/4-extension roller slide component sold as a single handed piece for production and replacement work.
The 1805 cabinet member earns its place in production cabinetry wherever the interior finish matters as much as the hardware. White and off-white melamine panels are the dominant interior surface in frameless kitchen and vanity cabinets, and a zinc or almond slide reads as a visual interruption against that background. The white epoxy coating on this member disappears into the panel, keeping the interior clean. Shops running white-interior kitchen runs, bathroom vanities, or custom closet systems use this member to maintain finish consistency across every drawer bay without specifying a separate color SKU per project.
The 1805 series is built from formed steel with a baked epoxy powder-coat finish. White epoxy is a color specification, not a structural upgrade — the steel underneath is the same regardless of finish. The roller bearing system uses nylon rollers running in formed steel tracks, which is the standard Euro-slide mechanism: it is engineered for quietness and reliability in the load range this member carries, not for heavy-duty or high-cycle industrial applications. The 1/2 inch side clearance requirement means the drawer box must be built 1 inch narrower than the inside cabinet opening.
Cabinet shops doing white-interior production runs are the primary buyer. Buying at the member level — rather than as a complete slide set — lets a shop match the exact quantities needed for a job without surplus handed members accumulating on the shelf. The Q-Pack format supports that purchasing pattern. Replacement and refacing contractors also reach for this member when a damaged cabinet-side profile needs to be swapped without touching the rest of the drawer. The 18 inch (450mm nominal) length fits cabinet depths common in kitchen base and wall units; the 1805 series is cataloged in metric nominal lengths from 300mm to 600mm, so there is a length step above and below this one if the depth runs longer or shorter.
No. This is the left-hand cabinet member only. A complete drawer installation requires one left-hand cabinet member, one right-hand cabinet member, and two drawer members — all from the 1805 series. Members from other series or brands do not interchange with this one.
Self-close. The 1805 closes on a built-in ramp that pulls the drawer home once it enters the capture zone — there is no damper. The close is positive and undamped, not a slowed, silent soft-close landing.
This is a 3/4-extension slide, so the rear portion of an 18 inch drawer stays inside the cabinet at full open. The whole drawer does not come clear of the cabinet opening.
Knape and Vogt recommends a maximum drawer width of 18 inches for the 1805 series. Build the drawer box 1 inch narrower than the inside cabinet opening to maintain the required 1/2 inch side clearance on each side.
The Q-Pack piece count is not confirmed in the available source data. Contact the sales team for the exact quantity per pack before placing a volume order.
Order this white 1805 cabinet member alongside its right-hand counterpart and the matching drawer members, and every drawer bay in your white-interior project is accounted for — no color conflicts, no surplus parts from mismatched sets.
Sold In: 100 Each
