Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 16 inch euro slides give a 3/4 extension drawer action, which lets the drawer open far enough for everyday cabinet access while keeping travel shorter for basic storage runs. These 1805 Series side mount drawer slides use a right hand cabinet member, so the installer aligns the cabinet side hardware to a defined orientation for repeatable layouts across multiple cabinets. A self-closing design pulls the drawer shut at the end of travel, helping drawers settle in the same position each time without manual pushing on every close. The white epoxy coated finish covers the slide members, providing a uniform, neutral appearance that blends with typical white or light interiors. A positive double-out stop keeps the moving member from over-traveling, which helps the drawer stay on track during operation. The lift out disconnect allows the drawer member to disengage from the cabinet member, so drawers can be removed for cabinet work or adjustment.
These Knape and Vogt 1805 Series side mount drawer slides are built as cabinet and drawer members that fasten along the drawer side, so they work with frameless or face-frame cabinets using a side-mount layout. The recommended fasteners are #6 x 5/8 inch Phillips pan head, which match typical cabinet construction thicknesses and give a head profile suited to slide mounting holes. Using that screw size lets the fastener seat properly in the slide holes, helping the slide track remain aligned along its full 16 inch length during use. The specified side clearance of 1/2 inch plus, 1/32 inch minus, 0 each side defines the drawer box width relative to the cabinet opening, which supports smoother slide movement when that clearance is followed. With a slide height of 35.5 mm, installers can plan vertical spacing so drawer boxes clear face frames, rails, or adjacent hardware.
The 1805 Series side mount drawer slides are part of Knape and Vogt epoxy coated euro slides, so they suit euro-style cabinet layouts that rely on a 32 mm pattern for hardware placement. With a 16 inch length, these slides match medium-depth cabinet drawers often found in kitchen, bath, and shop storage, where full-depth access is not required but a controlled 3/4 extension works well. The specified side clearance of 1/2 inch plus, 1/32 inch minus, 0 each side supports drawer boxes built slightly narrower than the opening, which helps the moving members travel without binding. A slide height of 35.5 mm means these slides can run in slimmer side spaces, fitting into drawer box designs where tall slide profiles would interfere with the contents or side panels. The white epoxy coated finish suits interiors that use white casework, helping the hardware blend into the cabinet environment instead of drawing attention when drawers are open.
The self-closing design of the 1805 Series euro slides engages near the end of closing travel, pulling the drawer into its final position so drawer fronts tend to line up evenly along a run of cabinets. A positive double-out stop provides a defined limit to opening movement, so drawers do not over-extend on the hardware, which helps maintain stability when drawers carry everyday contents. The lift out disconnect between the cabinet member and drawer member allows the drawer to be lifted free of the slide, which is useful when adjusting drawer fronts, sanding edges, or finishing cabinet interiors. Because the slides use a 32 mm pattern, installation can follow common system holes, supporting efficient production in shops already set up with 32 mm boring equipment. The recommended #6 x 5/8 inch Phillips pan head fasteners seat into the mounting holes in a way that helps resist pull-out in typical cabinet materials, supporting long-term alignment of the slide members.
The KV 1805-98 WH 400 is a Knape and Vogt 1805 Series side mount drawer slide with a self-closing design, so it supports euro-style drawers that close to a consistent position.
The slides are 16 inch length, which suits medium-depth cabinet drawers, giving a 3/4 extension travel that balances access with compact cabinet designs.
The slides require 1/2 inch side clearance plus, 1/32 inch minus, 0 each side, guiding drawer box width so the slide members move smoothly without binding.
The 1805 Series slides use a 32 mm pattern, so they align with standard system drilling in many euro-style cabinet shops using line-bored cases.
The recommended fasteners are #6 x 5/8 inch Phillips pan head screws, giving a head shape and length suited to securing the slide members to cabinet and drawer sides.
These Knape and Vogt 1805 euro slides have a white epoxy coated finish, which presents a clean, neutral look that coordinates with white cabinet interiors.
The Knape and Vogt 16 inch euro slides with 3/4 extension, self-closing design, and 1/2 inch side clearance are built for side mount cabinet applications that follow the 32 mm pattern. When a project calls for a white epoxy coated slide with a 35.5 mm height and defined system drilling, this 1805 Series right hand cabinet member configuration aligns with euro-style casework. Choosing this slide gives a known travel, finish, and mounting pattern that supports consistent drawer performance across a run of cabinets.
Sold In: 100 Each
