Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 1805 drawer slides define this 20 inch right hand side mount member as part of the 1805 Series epoxy coated Euro slide system, so it matches projects already built around that family. The self-closing design pulls the drawer shut at the end of travel, which helps drawers stay closed in everyday cabinet use. The 3/4 extension travel lets the drawer open far enough for access while keeping part of the slide engaged, which supports smooth movement under typical cabinet loads. The white epoxy coated finish covers the slide for a consistent appearance in white cabinet interiors. Being a side mount drawer slide member, it works in Euro-style installations where slides mount to the cabinet side. The 1805 Series identity ties this member to matching left hand drawer and cabinet components in the same Knape and Vogt system.
The 3/4 extension travel of this 20 inch member defines how far the drawer projects from the cabinet, which influences access to stored items while maintaining engagement for support. The side clearance requirement of 1/2 inch plus, 1/32 inch minus, 0 inch on each side sets the target space between the drawer box and cabinet interior, shaping drawer width calculations. The 35.5 mm height of the slide gives a low profile along the drawer side, which leaves room above and below for drawer construction details. The 32 mm pattern ties into standard system holes in Euro cabinets, which supports consistent positioning across multiple drawer openings in a case.
This component is the right hand drawer member identified in the SAP description as "20' RH DRW MBR, WHT 3/4 EXT," which defines its role on the drawer side of the system. As part of a side mount drawer slide assembly, it sits on the drawer's right side, working with a matching left hand drawer member and cabinet members from the same 1805 Series. The white finish aligns with white cabinet interiors, which is often preferred in Euro-style kitchen and bath installations. With a 20 inch nominal length, it suits cabinet depths built around that slide size, supporting drawers for typical base and wall cabinet applications using Euro slide construction.
The self-closing design engages near the end of travel, which draws the drawer fully closed and supports consistent shut positioning for fronts. The positive double-out stop engages at the open end of the stroke, which limits over-travel and helps keep the drawer captured on the slide during use. The lift out disconnect gives a defined motion to remove the drawer from the cabinet member, which aids in taking drawers out for finishing or service and then re-engaging them on the hardware. The epoxy coated white surface covers the steel with a smooth finish, which pairs with the system design to support slide motion in normal cabinet environments. Being part of the Knape and Vogt 1805 Series, this right hand drawer member integrates into that established slide line for repeatable installations.
The 1805-96 WH 500 part is a Knape and Vogt 1805 Series right hand drawer member for side mount Euro drawer slides, which defines its role on the drawer side of the assembly.
The Knape and Vogt 1805 drawer member has a 20 inch length, which suits cabinet depths planned around that nominal slide size for medium-depth drawer boxes.
This euro drawer slide requires 1/2 inch side clearance plus, 1/32 inch minus, 0 inch on each side, which controls drawer box width for smooth sliding.
This 1805 Series member uses a 32 mm pattern, which matches Euro cabinet drilling systems to align with line-bored cabinet sides.
This slide specifies #6 x 5/8 Phillips pan head fasteners, which match the mounting holes for securing the member to cabinet sides and drawer sides.
The self-closing design pulls the drawer shut at the end of travel, which helps fronts sit consistently closed and reduces partially open drawer positions.
This 20 inch right hand drawer member from the Knape and Vogt 1805 Series combines self-closing action, 3/4 extension, and a 32 mm pattern, which fits Euro-style cabinet runs using side mount slides. The defined 1/2 inch side clearance and #6 x 5/8 Phillips pan head fasteners specification provide concrete sizing and mounting points, which support predictable results across multiple drawers when building or updating casework with this white epoxy coated Euro slide system.
Sold In: 100 Each
