Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 1805 drawer slides define this right hand cabinet member from the 1805 Series, designed as a side mount drawer slide for cabinet installations where a matching system of members is used. This component is a right hand cabinet member in white, so it pairs with the corresponding left cabinet and drawer members to form the full drawer slide action on one side of the opening. The slide height is 35.5 mm, which sets a consistent vertical profile for planning notch depths and clearances along the cabinet side. The design is a 3/4 extension slide, so the drawer moves out most of its length while still retaining guided contact at the rear. A self-closing design is built in, so the slide pulls the drawer closed at the end of travel for a controlled final motion. The epoxy coated finish in white provides a smooth coated surface across the steel slide, which supports regular opening and closing in a cabinet environment.
This Knape and Vogt 1805 Series right hand cabinet member is part of a side mount drawer slide system, so it fastens to the cabinet side and works with the matching drawer members on the box. The member uses the 32 mm pattern, which aligns with system-drilled cabinet sides when a shop bores rows at 32 mm spacing for hardware. The side clearance specification of 1/2 inch plus or minus 1/32 inch on each side defines the drawer box width needed relative to the opening, so the assembled 1805 Series slides run smoothly. The recommended #6 x 5/8 inch Phillips pan head screws match the mounting holes and typical side thickness, so they seat properly in the 32 mm pattern without over-penetrating common cabinetry materials.
This 24 inch 3/4 extension drawer slide member is described in the SAP data as a 24 inch right hand cabinet member, which identifies it for use on the right cabinet side in drawers built to that nominal length. The 3/4 extension action is part of the 1805 Series design, which means the drawer extends a substantial portion of its length while part of the slide remains engaged in the cabinet, supporting the load along the travel path. The component is finished in white with an epoxy coated surface, which suits cabinet interiors where a light-colored slide is preferred along with a coated steel running surface. Because the side clearance requirement is 1/2 inch plus or minus 1/32 inch on each side, the cabinet opening and drawer box are dimensioned so this right hand member, together with the full set of 1805 members, operates in the designed clearance envelope. The side mount configuration places this member directly against the cabinet side, which leaves the underside of the drawer box free for other layout considerations.
The self-closing design in this Knape and Vogt 1805 Series member means the slide mechanism provides a controlled pull-in at the end of stroke, so drawers tend to return to a consistent closed position that aligns fronts with the cabinet. The positive double-out stop incorporated into the slide limits outward travel at the intended 3/4 extension, so installers and builders get a predictable open position that protects the members from over-travel stresses. The 32 mm pattern on the cabinet member ties into system drilling practices, so once the hole locations are set for one cabinet side, the same pattern repeats for additional cabinets using the same slide family. The side clearance specification of 1/2 inch plus or minus 1/32 inch on each side translates into a defined drawer width target, which supports batches of drawer boxes built to consistent sizes for multiple openings. When shops use the recommended #6 x 5/8 inch Phillips pan head screws, the screw length and head profile fit the slide holes within the 32 mm pattern, which helps maintain alignment across the run of mounting points.
The KV 1805-98 WH 600 is a Knape and Vogt 1805 Series right hand cabinet member side mount drawer slide component, so it serves as the cabinet-side piece in a coordinated slide set.
The SAP description identifies this as a 24 inch right hand cabinet member with 3/4 extension, so it matches drawer boxes built for 24 inch nominal slide length and partial extension travel.
The 1805 Series side clearance is 1/2 inch plus or minus 1/32 inch on each side, so drawer box width is set relative to the opening to maintain that running gap.
This member has a 32 mm pattern, so mounting holes follow a 32 mm spacing layout that matches cabinets drilled on a 32 mm system for hardware installation.
The recommended fasteners are #6 x 5/8 inch Phillips pan head screws, so that screw size and head style are specified for attaching the slide to cabinet sides.
The self-closing design in the 1805 Series slide pulls the drawer into its final closed position near the end of travel, which helps seat the drawer front consistently against the cabinet face.
The Knape and Vogt 24 inch 3/4 extension self-close epoxy coated Euro 1805 Series right hand cabinet member in white gives a defined side mount slide component with 32 mm pattern holes, 35.5 mm height, and 1/2 inch plus or minus 1/32 inch side clearance. For runs using the 1805 family, this right hand cabinet member matches with the corresponding left and drawer members so drawers operate with self-closing action, positive double-out stops, and the epoxy coated white finish across the slide system.
Sold In: 100 Each
