Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 20 inch drawer slide 1805-97 WH 500 is a left hand, side mount drawer slide in the 1805 Series, so it handles one side of a standard euro-style drawer run in framed or frameless cabinetry using this pattern. The 3/4 extension design lets the drawer travel most of its length, which gives practical access to stored items while keeping some section of the slide engaged in the cabinet member for support under everyday shop or kitchen use. A self-closing design pulls the drawer shut at the end of travel, which helps drawers stay closed once pushed past the self-close point in workrooms, offices, or residential cabinets. The slide is epoxy coated with a white finish, so the moving members are protected by the coating while presenting a clean white appearance alongside matching cabinet interiors. As a side mount drawer slide, it works with a cabinet member fixed to the side wall and a mating drawer member on the drawer side.
This Knape and Vogt 1805 Series side mount drawer slide is specified with a side clearance of 1/2 inch plus 1/32 inch minus 0 inch for each side, so drawer box outside width can be planned precisely relative to the cabinet opening to create a smooth slide fit. The slide height of 35.5 mm keeps the hardware relatively low along the drawer side, which helps when positioning slides to clear drawer bottoms or adjacent hardware in tight cabinet spaces. The 32 mm pattern confirmation means the slide hole pattern aligns with 32 mm system boring, so installers working with line-bored cabinet sides can locate screws quickly using existing hole rows. The left hand designation identifies this component for the left side of the opening, which matters when pairing it with the matching right-hand members in a full drawer system.
This Knape and Vogt 20 inch 3/4 extension self-close epoxy coated euro slide is part of the 1805 Series, placing it in a side mount drawer slide line used in cabinet and drawer construction where euro-style slides are specified. The left hand cabinet member and left hand drawer member identified in the Q Pack description define the parts that operate on the left side of a drawer assembly, so this orientation information supports building correct sets for each cabinet opening. With a white epoxy coated finish, this slide suits white cabinet interiors or shop fixtures where a light-colored slide matches surrounding surfaces while benefiting from the epoxy coating on moving steel members. The 20 inch length ties directly to drawer depth planning, so cabinetmakers matching 20 inch deep drawer boxes can align slide length with box size. Because the 32 mm pattern is present, the slide works with cabinet sides drilled on that system, which is common in euro-style production woodworking, simplifying layout in repeat work.
The self-closing design of this Knape and Vogt 1805 Series slide adds a pull-in action at the end of travel, so drawers tend to return fully once pushed past the self-close point, which can help maintain a consistent closed position across a bank of drawers. A positive double-out stop within the slide controls how far the drawer moves forward, which helps prevent accidental over-extension that could stress joints during frequent opening in shops, offices, or residential spaces. The lift out disconnect allows the drawer member to separate from the cabinet member, so drawer boxes can be removed and reinstalled in the same hardware position, supporting repainting, repair, or interior access while keeping slide alignment. Specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines the opening-to-drawer relationship, supporting repeatable drawer sizing when producing multiples. The 35.5 mm height and side mount style give a predictable mounting reference along the drawer side, which simplifies jig setup when drilling pilot holes for the recommended #6 x 5/8 inch Phillips pan head screws.
The 1805-97 WH 500 is a Knape and Vogt 1805 Series left hand side mount drawer slide with 3/4 extension and self-closing design, so it functions as one side of a euro-style side-mount drawer system.
This slide uses 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, which guides drawer box width when fitting into a cabinet opening for smooth operation.
The Knape and Vogt 1805 Series slide has a 32 mm pattern, aligning its holes with common 32 mm system boring, which can speed layout on line-bored cabinet sides.
This 20 inch slide is epoxy coated with a white finish, giving the slide a white appearance that coordinates with light-colored cabinet interiors while using an epoxy-coated surface.
Recommended fasteners are #6 x 5/8 inch Phillips pan head screws, matching the slide hole design so the screw heads seat properly during side mounting.
The self-closing design adds a pull-in action near the closed position, so the slide helps draw the drawer shut once pushed past the activation point, supporting consistent closure.
The Knape and Vogt 20 inch drawer slide in the 1805 Series offers left hand, side mount, 3/4 extension performance with self-closing action, so it suits euro-style cabinet projects using this pattern. With specified 1/2 inch plus 1/32 inch minus 0 inch side clearance and a 32 mm pattern, it fits well into production or custom work already based on those dimensions. For projects needing a white epoxy coated finish on visible drawer hardware, this slide aligns finish, pattern, and mounting style in a single part choice.
Sold In: 100 Each
