Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand drawer member of Knape and Vogt's 1805 series epoxy-coated Euro slide — a 14 inch (350mm nominal), white, self-closing, 3/4-extension roller slide member designed for side mounting in production cabinet runs. Sold as a single right-hand component, this Q-Pack listing targets shops that order members by hand and quantity rather than in pre-matched sets.
The right-hand drawer member attaches to the bottom edge of the right side of the drawer box and rides in the matching right-hand cabinet member mounted inside the cabinet. At 14 inches (350mm nominal), this member suits shallower cabinet runs — think spice drawers, small vanity drawers, and narrow utility drawers where the full-depth slide would be oversize. This is a 3/4-extension design: the drawer opens far enough for comfortable daily access, but the rearmost few inches of the box stay inside the cabinet at full travel. If full rear access is required, a full-extension slide is the right pick instead.
The 1805 series uses an epoxy powder-coat finish over steel — baked on for durability and matched to white cabinet interiors. White is the right call when the cabinet box is white melamine, white-painted wood, or white thermally fused laminate, because the slide blends into the interior rather than drawing the eye. The nylon rollers run quietly against the steel track, and the self-closing ramp is built into the cabinet member so the close happens automatically once the drawer crosses the capture zone. This is a positive, undamped close — self-close, not soft-close. The drawer pulls firmly shut, not silently eased.
Production cabinet shops are the primary buyer here: if you're building a run of white-interior face-frame or frameless cabinets and already stock the matching left-hand and cabinet members, ordering by individual component keeps inventory lean and avoids receiving hardware you don't need. The Q-Pack format reinforces this — it's a shop-floor quantity, not a single-drawer retail pack. This member also serves shops replacing a damaged right-hand piece without pulling apart a working set, and contractors refacing or retrofitting shallow drawers in an existing white cabinet run. The 1/2 inch side clearance requirement is standard for the 1805 series: build the drawer box 1 inch narrower than the inside cabinet width to leave the correct gap on each side.
You need a left-hand drawer member and a matched left-hand and right-hand cabinet member from the same 1805 series. Two right-hand pieces will not make a working pair. Members from other series or brands are not interchangeable with 1805 components.
No. The 1805 self-closing ramp pulls the drawer firmly shut once it enters the capture zone — it is a positive, undamped close. Soft-close uses a hydraulic damper to slow and quiet the landing. This member does not have a damper.
This is a 3/4-extension slide. The drawer opens most of its length but the back few inches remain inside the cabinet at full travel. For full rear access, look for a full-extension model in the same color.
This Q-Pack contains right-hand drawer members only. The pack quantity is not specified in the product data — confirm the piece count at checkout or with your account rep before placing a production-size order.
Yes, but face-frame installation requires rear mounting sockets or brackets to support the back end of the slide. Those components are series-specific and sold separately; do not substitute sockets from other slide brands or series.
When the interior is white and the run is deep, the 1805 right-hand drawer member in white keeps both the build and the ordering straightforward — one component, one hand, the exact quantity your shop needs.
Sold In: 100 Each
