Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand drawer member from Knape and Vogt's 1805 series — a 24 inch (600mm nominal), white epoxy-coated, self-closing, 3/4-extension roller slide component sold as a Q-Pack for production ordering. It is the drawer-side profile only; the matching cabinet members are separate SKUs in the same series.
One working drawer in the 1805 series requires a right-hand and a left-hand member for each component type — cabinet and drawer. This listing ships the right-hand drawer member only. Pair it with the matching left-hand drawer member and both cabinet members from the same 1805 series to make a complete, functioning slide assembly. Two right-hand pieces will not make a working set, and 1805 members do not interchange with other brands or series.
The Q-Pack format is aimed at shops running multiple drawers at once. Confirm the Q-Pack piece count against your run before ordering — the count is not stated in the source data.
The white epoxy coating on the 1805 series exists to match, not contrast. In a white melamine or painted cabinet box, the slide profile disappears into the interior, keeping the focus on the drawer front rather than the hardware behind it. The 24 inch (600mm nominal) length suits deeper base cabinet drawers where the extra length keeps the drawer tracking squarely through its full 3/4-extension travel. At full open, the rear portion of the drawer remains inside the cabinet — that is the nature of 3/4 extension, and it is what keeps this slide at a production-friendly price point.
The 1805 series is the workhorse of production kitchen, vanity, and closet cabinetry built on the 32mm European system. Cabinet shops running white-interior frameless boxes will find the 24 inch member length covers the deeper drawer positions that shorter members cannot reach. Installation calls for 1/2 inch of side clearance per side, so size the drawer box 1 inch narrower than the inside cabinet width. Knape and Vogt recommends a maximum drawer width of 18 inches for this series. The self-closing ramp is a positive, undamped close — a practical feature for busy kitchen and closet drawers that need to shut reliably without requiring a deliberate push.
No. This is the right-hand drawer member only. One drawer requires a right-hand and a left-hand drawer member, plus a right-hand and left-hand cabinet member — all from the 1805 series.
No. The 1805 series closes on a built-in ramp — a self-close that pulls the drawer fully shut with a positive, undamped action. It is not a damped soft-close.
No. Pair 1805 drawer members only with 1805 cabinet members from Knape and Vogt. Members from other series or brands are not compatible.
The drawer side thickness specification for this series is not confirmed in the available data. Build the box to Knape and Vogt's published 1805 series specification before ordering.
This is a 3/4-extension member, so the drawer opens approximately three-quarters of the slide length. The rear portion of the drawer stays inside the cabinet at full open — this is not a full-extension slide.
When the run calls for 24 inch white drawer members and the cabinet interiors are white, the 1805-96 WH 600 Q-Pack gives the shop exactly what it needs — the right hand, the right length, the right finish — without the extras that slow down a focused order.
Sold In: 100 Each
