Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand drawer member from Knape and Vogt's 1805 series — a 24 inch (600mm nominal), white epoxy-coated, self-closing, 3/4-extension roller slide component for side-mount installation, sold as a single left-hand piece in a Q-Pack quantity format.
The white finish is the detail that drives this choice. When the cabinet interior is white melamine, white painted MDF, or white thermally fused laminate, a white epoxy slide member sits flush against the box side instead of catching the eye as a gray or zinc element. That visual result matters in finished kitchens and bath vanities where the drawer box is visible at full open. Shops running white-interior cabinets in volume buy members at the hand and length they need, rather than complete sets, to keep the pick-and-pull process tight on the line. The 24 inch length (600mm nominal) suits standard 24-inch-deep base cabinet drawers — the common residential kitchen depth — making this the natural match for that volume work.
The 1805 member is epoxy powder-coated steel: the coating bonds well to the formed steel profile and holds up through years of daily drawer cycles without flaking. White is the color most kitchen and bath cabinet shops stock in depth, and the 1805 series delivers it in the production-friendly Q-Pack. The self-closing action is a mechanical ramp built into the member — not a damper. Push the drawer to within range and the ramp pulls it home with a definite, positive close. That is self-close, not soft-close: the close is quick and positive rather than slowed and silent. For projects where a damped landing is specified, a soft-close slide is the right product. For the broad category of production residential cabinetry where a firm, reliable close at a sensible price is the goal, the 1805 self-close ramp is well established on the job.
This member is aimed at cabinet shops and installers running production quantities of white-interior cabinets. One drawer requires a left-hand member, a right-hand member, and both drawer members — ordering two left-hand pieces produces a non-working set, so confirm hand before placing. The 1805 series is available in metric nominal lengths from 300mm to 600mm; this 24 inch member is the 600mm size, the longest in the range, and Knape and Vogt recommends a maximum drawer width of 18 inches for the series. Mount on the side with 1/2 inch of clearance per side, which means the drawer box runs 1 inch narrower than the cabinet opening. Match 1805 cabinet members and drawer members within the same series — members from other brands and series do not interchange.
No. This Q-Pack is the left-hand drawer member only. A complete drawer requires a matching right-hand drawer member and the corresponding left-hand and right-hand cabinet members, all from the 1805 series.
No. The 1805 uses a mechanical ramp that pulls the drawer shut with a firm, positive close — there is no damper. If a slowed, silent landing is required, specify a soft-close slide instead.
This is a 3/4-extension slide, so the rear portion of the drawer remains inside the cabinet at full open. It does not provide full access to the back of the drawer.
Knape and Vogt recommends a maximum drawer width of 18 inches for the 1805 series. Build the drawer box 1 inch narrower than the cabinet opening to allow 1/2 inch of side clearance per slide.
No. The 1805 drawer member must pair with 1805 cabinet members. Components from other brands or series are not interchangeable.
When the job is white-interior cabinets in volume, the KV 1805 left-hand drawer member in 24 inches gives production shops the exact hand, length, and finish they need — ordered in the quantity the line demands, without excess.
Sold In: 100 Each
