Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 3/4" round plastic grommet brown is a two piece round wire grommet from Hardware Concepts, Inc. that organizes wire pass-through in a 3/4 inch bore hole. The design uses a grommet cap and hole liner so the cut edge of the bore hole is shielded, which helps protect wires as they pass through cabinet, desk, or panel openings. The cap has a pivot hinge hole for wire, letting wires exit at an angle while still passing through a defined opening. This lets installers create a cleaner feed point instead of an open raw hole. The grommet is made of plastic, so it provides a smooth bearing surface around the wire path in typical woodworking and workspace components.
The round wire grommet is designed for a 3/4 inch bore hole diameter, so drilling to that size sets the opening for the liner to sit securely. Using the two piece construction, the hole liner occupies the bore, then the cap covers the top, which helps align the wire path through the center of the opening. Because the cap has a pivot hinge hole for wire, the wire exit can follow the equipment layout while staying supported by the plastic edge. The part number 6605-058 identifies this specific configuration within the broader series of round wire grommets offered in eleven sizes and seven colors.
The Hardware Concepts, Inc. round wire grommet sits within the category of shelf, closet and garage organization, as well as multimedia and workspace components, so it fits storage runs, workbenches, and office furniture where cables pass through surfaces. The 3/4 inch bore hole diameter focus lets this grommet serve small cable bundles or individual wires, which is useful around compact equipment, task lighting, or low-voltage lines. Because it is a two piece plastic design with grommet cap and hole liner, the liner stabilizes in the bore hole while the cap finishes the visible surface, giving a consistent transition wherever wiring exits shelves, panels, or benchtops.
The cap has a pivot hinge hole for wire, which forms a movable opening that can swing to one side, guiding cables toward connected devices without relying on an oversized fixed cutout. That pivot feature helps keep wire deflection controlled at the point where it leaves the bore hole, which is useful when routing around corners or into tight equipment bays. With eleven different sizes from 3/4 inch bore hole diameter to 3-1/2 inch bore hole diameter available in the same style, layout plans can scale from small control runs to larger bundles while using a consistent look. The seven color range offers options so grommets can visually align with surrounding cabinetry and workspace surfaces, which supports neat, intentional wire management in finished projects.
The two piece plastic construction with a grommet cap and hole liner helps installers create repeatable cut-and-fit steps: drill the 3/4 inch bore hole, seat the liner, then apply the cap to finalize the pass-through. This sequence means the wire path is defined by the internal liner rather than the raw drilled edge, which keeps the opening consistent across multiple holes on the same run. The pivot hinge hole for wire in the cap lets cables be directed in different directions from the same bore location, so a single opening can serve changing equipment positions while the visible hardware stays fixed.
Because the grommet is part of a group that spans eleven sizes and seven colors, project standards can be built around this Hardware Concepts, Inc. round wire grommet series, using size and color choices to coordinate with cabinet or workspace layouts. The 6605-058 identification ties back to this 3/4 inch bore hole version, helping installers call out the same part each time that specific size and appearance are required. As part of the grommets product class, this configuration focuses on managing the interface between drilled holes and wiring, giving a predictable, finished transition point anywhere wires pass through wood or similar panels.
The 6605-058 round wire grommet is designed for a 3/4 inch bore hole diameter, so holes drilled to that size let the liner seat properly and define the wire pass-through.
The two piece plastic design, with grommet cap and hole liner, lets the liner occupy the bore and the cap finish the top edge, creating a smoother, more controlled opening for wires.
The cap has a pivot hinge hole for wire, so the opening in the cap can swing, allowing wires to exit at different angles while staying guided by the grommet edge.
This round wire grommet is listed under shelf, closet and garage organization and multimedia and workspace components, aligning with cabinet, storage, and desk wire pass-through points.
This specific Hardware Concepts, Inc. round wire grommet is identified by manufacturer part number 6605-058 and a 3/4 inch bore hole diameter configuration.
This style of grommet is available in eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameters and in seven colors, supporting consistent appearance across projects.
This two piece round wire grommet from Hardware Concepts, Inc., part number 6605-058, fits 3/4 inch bore hole diameter openings and uses a grommet cap with pivot hinge hole for wire over a matching liner. For storage, closet, garage, or multimedia workspace layouts where a brown round plastic wire grommet suits the design, this configuration gives a defined pass-through point within the broader eleven-size, seven-color series. Use this part when a 3/4 inch bore hole and this style of wire control match the project plan.
Sold In: 1 Each
