Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 3-1/4 round plastic grommet gray describes a two piece round wire grommet from Hardware Concepts, Inc. that manages wires passing through a 3-1/4 inch bore hole, so cable runs through desks, counters, or cabinets can be routed through a clean, defined opening. The product consists of a grommet cap and a hole liner, so the edge of the cutout is covered while the opening in the cap handles the actual wire path and keeps it visually organized. The cap has a pivot hinge hole for wire, which lets the installer rotate the opening orientation during layout so cords can follow a more natural path to nearby equipment. Being a plastic grommet allows this wire pass-through point to sit flush and stable in typical woodworking or laminate applications without reacting to common shop or office environments.
The SAP description specifies 2PC 3-1/4 round plastic grommet gray, so it is designed for a 3-1/4 inch bore hole where a two piece plastic construction can sit within the cutout and present a gray finished ring at the surface. The product name identifies it as part of the Round Wire Grommets line covering 3/4 inch to 3-1/2 inch bore holes, so this specific size fits within that range and suits openings sized at 3-1/4 inches in work surfaces or cabinet panels. Because the design relies on a separate cap and liner, the installer can seat the liner in the bore hole first and then place the cap, which helps bring the visible top ring flush to the surface for a neater cable pass-through.
The product is categorized under Multimedia and Workspace Components and Grommets, so it is intended for wire management in work surfaces where cables need to pass through a controlled opening between equipment and the space below. The two piece construction with grommet cap and hole liner allows the component to be used in desks, counters, or cabinetry panels that have a 3-1/4 inch bore hole, so the raw cut edge is shielded on both the vertical wall of the hole and the top surface. Being part of a series of round wire grommets available in eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameters means this particular 3-1/4 inch size can be matched with other sizes in the same style across a larger installation where devices require different pass-through diameters.
The description notes this style grommet has two pieces, a grommet cap and hole liner, so the liner can sit securely in the 3-1/4 inch bore hole while the cap rides over it, creating a finished appearance and covering the cut perimeter with a consistent gray ring. The cap has a pivot hinge hole for wire, so the exit slot can be turned relative to the fixed liner, giving a small adjustment window that helps route cords toward a desired side of the opening without cutting additional material. The availability of seven colors across this grommet family means the gray version, identified as 6655-021, can be chosen where a neutral tone aligns with surrounding surface finishes, helping the wire exit point blend into the overall workspace design. Because these grommets fall under Shelf, Closet & Garage Organization and Multimedia and Workspace Components, they support projects where controlled cable routing contributes to an orderly environment around storage or equipment zones.
The 2PC 3-1/4 round plastic grommet gray is specified for a 3-1/4 inch bore hole, so openings drilled to that diameter accept the liner and cap for a snug wire pass-through.
The 6655-021 round wire grommet uses a liner that seats in the bore hole and a cap that covers the top, so the hole edge is lined while the cap forms the finished wire exit.
The cap has a pivot hinge hole for wire, allowing the opening to rotate relative to the liner so cables can exit toward the side that best matches equipment placement.
The 6655-021 grommet is listed under Multimedia and Workspace Components and Grommets, so it suits work surfaces, cabinets, or similar panels where wires pass through a defined hole.
The round wire grommet line is available in seven colors, so the gray 6655-021 version can be chosen when a neutral tone coordinates with surrounding surfaces.
The round wire grommet series covers eleven sizes from 3/4 inch to 3-1/2 inch bore holes, and the 6655-021 model occupies the 3-1/4 inch position within that range.
The 2PC 3-1/4 round plastic grommet gray from Hardware Concepts, Inc. provides a two piece cap and liner solution for a 3-1/4 inch bore hole, giving a defined, gray-finished wire exit in multimedia or workspace projects. With a pivot hinge hole for wire and a place within an eleven-size, seven-color round wire grommet family, this 6655-021 model aligns with jobs that call for organized cable routing through worktops or cabinet panels. For projects needing a 3-1/4 inch bore hole wire route, this round plastic grommet sets a consistent standard for future repeat work.
Sold In: 1 Each
