Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 1-1/2 round plastic grommet brown describes a Hardware Concepts, Inc. wire grommet designed for a 1-1/2 inch bore hole, so it routes cables through desks, cabinets, or panels using a consistent cut size. The two piece plastic design, identified in the description as grommet cap and hole liner, separates trim and lining functions, so the liner protects the bore edge while the cap presents a finished opening. Being a round wire grommet keeps the cable pass-through centered in the hole, which helps maintain predictable clearances in furniture layouts. The brown color option lets the installer match or coordinate with darker wood tones or finishes, so the pass-through blends visually into the surface. As part of a line that ranges from 3/4 inch to 3-1/2 inch bore hole diameters, this specific 6620-058 version fits projects where a 1-1/2 inch opening is already part of the plan.
This Hardware Concepts, Inc. grommet is specified for a 1-1/2 inch bore hole diameter, so installers can rely on a standard round cut size when drilling panels or desktops. The two piece layout, with a dedicated hole liner, lets the liner sit in the bore and the cap rest above, which keeps the fit controlled by the drilled diameter rather than by panel thickness. As part of a family sized from 3/4 inch up to 3-1/2 inch bore hole diameters, the 6620-058 size can be combined with other diameters from the same line when a project mixes small and larger cable openings. The round shape keeps layout straightforward when ganging multiple holes along a work surface, because the same drilling approach applies across the run.
This round wire grommet sits in the Multimedia and Workspace Components group, so it suits desk, workstation, and equipment furniture where cables must pass cleanly through panels. The product also appears under Shelf, Closet & Garage Organization, which aligns its use with closet or garage systems that route power or data lines behind shelving. Because it is a 1-1/2 inch bore hole model within a set spanning 3/4 to 3-1/2 inch bore sizes, it addresses openings that need slightly more room than minimal cable holes without moving into very large cutouts. The two piece plastic format with a separate liner supports installations in wood-based panels typically used by the woodworking industry for cabinets and work surfaces.
The cap with pivot hinge hole for wire defines how cables exit the grommet, so the hinge opening helps direct wires while retaining a tidy edge at the surface. Because the cap and liner are paired as a two piece plastic assembly, the liner can stay seated in the 1-1/2 inch bore while the cap provides the finished look, which supports repeatable results across multiple panels using the same drill bit. The brown color option, listed among seven available colors, lets builders repeat an appearance standard across several rooms or stations by specifying the same finish. Identification by manufacturer part number 6620-058 further supports consistent reordering and replacement on larger jobs, since the same part controls both size and style across repeat installations.
The 6620-058 round wire grommet is specified for a 1-1/2 inch bore hole diameter, so drilling to that size sets the opening that both the liner and cap rely on for a proper fit.
The two piece design with grommet cap and hole liner lets the liner protect the bore edge while the cap finishes the surface, which supports cleaner edges and more uniform results across panels.
The cap has a pivot hinge hole for wire, which guides cables through a defined opening so the pass-through angle and edge contact stay controlled during everyday use.
This round wire grommet is categorized under Multimedia and Workspace Components and Shelf, Closet & Garage Organization, aligning it with desks, workstations, closets, and garage systems needing cable routing.
This Hardware Concepts, Inc. 6620-058 unit is described as a two piece plastic grommet, so both the cap and liner are plastic components suited to furniture and panel applications.
This 1-1/2 inch bore hole model sits within a range of eleven sizes from 3/4 inch to 3-1/2 inch, allowing coordinated hole diameters across a project using the same product family.
This Hardware Concepts, Inc. 6620-058 two piece plastic grommet pairs a 1-1/2 inch bore hole fit with a cap and liner design, which suits woodworking and multimedia furniture where a defined cable pass-through is required. The round wire grommet layout, brown color option, and membership in a size range from 3/4 to 3-1/2 inch bore diameters allow it to slot into desks, closets, or garage organization systems that follow standard drilling patterns. For projects built around Wurth Baer Supply offerings, this part number gives a consistent way to repeat the same pass-through detail across multiple panels or locations.
Sold In: 1 Each
