Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2-piece cable grommet describes this Hardware Concepts, Inc. 6626-010 round plastic cable grommet that manages wires through a work surface while covering the raw cutout. The design uses a grommet cap and a matching hole liner, so the bore edge is shielded by plastic instead of exposed material. This style grommet is part of a multimedia and workspace components category, which suits desks, countertops, and similar surfaces where cables must pass cleanly. The cap is white, giving a neutral look that blends with many light-colored surfaces in office, closet, or garage organization layouts. The product belongs to the grommets class, so its primary role is protecting wires and the cut edge. By matching a 1-3/4 inch round bore hole diameter, it fits common drill sizes used for cable routing holes in laminated panels and wood tops.
The SAP description identifies this unit as a 2PC 1-3/4 inch round plastic grommet, so the liner is sized for a 1-3/4 inch bore hole diameter, giving a snug, defined fit in a properly drilled opening. The round plastic liner drops into the hole, creating a stable edge for the cap to rest on, which keeps the wire pass-through centered. Because this style is a 2-piece cable grommet, the cap can be oriented so the pivot hinge hole aligns with the cable path, reducing sharp bends in the wires. The round form matches typical hole-saw cuts used in desks, workstations, and cabinetry tops across closet and garage organization projects.
The 6626 2 inch 2-piece cable grommet belongs to the multimedia and workspace components group, so it suits surfaces carrying computer, power, or low-voltage cables. The white finish fits well on light desks and worktops in offices or home workstations where visual distraction around the cable opening should be limited. As a grommet in the shelf, closet and garage organization category, it also works on panels in storage systems where power strips or chargers need cables to exit neatly. The 1-3/4 inch bore hole diameter specification means it aligns with many common hole saw sizes used in cabinetry shops, allowing predictable hole preparation. Because this style grommet uses a liner, the edge of the panel is covered, which helps keep cable jackets from contacting the raw substrate in regular use.
The grommet cap and hole liner construction gives a repeatable seating point, because the liner defines the hole boundary and supports the cap from below. The pivot hinge hole for wire in the cap lets the opening be positioned relative to the direction of the cable bundle, which helps route cords without twisting them against the edge. With the grommets available in eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameters, shop layouts can standardize tooling knowing each bore size corresponds to a matched liner and cap. The white plastic material coordinates with many laminate and painted finishes, creating a consistent appearance when multiple cable points are drilled along a run of cabinets or workstations. As a 2-piece cable grommet, it can be set after the bore hole is prepared, allowing clean finishing at the end of the installation sequence.
The 2PC 1-3/4 inch round plastic grommet is sized for a 1-3/4 inch bore hole diameter, so it matches many standard hole saw dimensions used for cable openings.
The 2-piece cable grommet uses a liner seated in the 1-3/4 inch bore hole and a cap resting on top, so the liner protects the edge while the cap finishes the visible surface.
The cap has a pivot hinge hole for wire, which lets the opening swing to line up with cable paths so cords pass through while most of the hole remains covered.
The 6626 cable grommet is categorized under multimedia and workspace components and shelf, closet and garage organization, so it suits desks, worktops, and storage panels needing cable pass-throughs.
The 6626 2 inch 2-piece cable grommet name describes the general grommet size, while the SAP description specifies a 1-3/4 inch bore hole diameter for the required cutout.
This style grommet is available in eleven different sizes from 3/4 inch bore hole diameter to 3-1/2 inch bore hole diameter, so similar parts can match various hole sizes.
The 6626 2 inch 2-piece cable grommet, white, gives a defined finish for a 1-3/4 inch round cable hole using a cap and liner design. The pivot hinge hole for wire lets you align cable direction while still covering most of the opening, which helps organize cords in multimedia work areas, closets, and garage systems. For projects needing a white round plastic cable grommet in this size range, this Hardware Concepts, Inc. model aligns with the stated bore hole diameter and workspace-focused category.
Sold In: 1 Each
