Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
6610 1-1/4" 2-Piece Cable Grommet, White is a round plastic grommet from Hardware Concepts, Inc. that organizes cables through a 1-1/4 inch bore hole diameter, keeping cord pass-through points clean for multimedia, workspace, or closet projects. The two-piece design, with a grommet cap and hole liner, creates a finished edge around the cutout, which helps protect cables from contact with raw board edges. The white color offers a neutral appearance in many shelf, closet, and garage organization layouts, supporting consistent visual lines on light-colored surfaces. As part of Wurth Baer Supply's multimedia and workspace components, this grommet fits naturally into workstation builds where cords must pass through panels. The plastic construction keeps weight low around desk or cabinet panels, which matters on thinner materials often used in modern casework.
The specified 1-1/4 inch bore hole diameter tells installers exactly how to prepare the panel opening, which speeds layout when repeating holes across a run of cabinets or desks. Using this fixed bore size ties the grommet fit directly to common drill or hole-saw sizes, which simplifies tool selection on site. Because the part is a round plastic grommet, it nests into the drilled circular opening, which helps seat the liner evenly around the perimeter. The matching grommet cap then sits over the liner, which supports a consistent edge reveal even if the cutout edges are slightly rough. This predictable fit around the 1-1/4 inch opening supports repeatable results across closet, shelf, and garage organization projects that carry similar panel thicknesses.
This style grommet is positioned in shelf, closet, and garage organization, as well as multimedia and workspace components, which aligns it with panels that need clean cable routing. In a closet or garage panel, the round plastic grommet manages low-voltage or power cords that pass through shelving, keeping the hole dressed in white where the cable exits. At a workstation or multimedia desk, the cap and hole liner guide wires from equipment through the 1-1/4 inch bore hole diameter, which helps separate cable pass-through from open desktop areas. Because the grommet is white, it visually matches many painted or melamine work surfaces, allowing the cable opening to recess into the background of the installation.
The two-piece configuration, with grommet cap and hole liner, divides the role of lining and covering the cutout, which helps control both edge protection and visible finish around the opening. The cap's pivot hinge hole for wire allows wires to route through without removing the cap, which keeps the opening controlled once the panel is in service. That pivot-style opening focuses the movement of cables through a defined path, which matters when equipment is adjusted but the hole location must stay uniform. Having a clearly stated 1-1/4 inch bore hole diameter means each hole in a run can be drilled to the same dimension, supporting straight visual alignment of grommets along counters, shelves, or cabinet tops. Being part of Hardware Concepts, Inc. grommets, this 6610-010 model sits within a known series that offers eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameters, which gives planners a way to match this 1-1/4 inch piece to other openings in the same project layout.
The 6610 1-1/4" 2-Piece Cable Grommet, White is sized for a 1-1/4 inch bore hole diameter, so panels are drilled to that dimension for the liner and cap to seat properly.
The grommet uses a separate cap and hole liner so the liner finishes the bore edge while the cap covers the top, giving a neater cable opening on both surfaces.
The cap has a pivot hinge hole for wire, which lets cables pass through a controlled opening while the cap stays in place, keeping the exit point organized.
This round plastic grommet is categorized for shelf, closet, and garage organization and multimedia and workspace components, so it suits storage panels and work surfaces carrying cables.
The white color lets the grommet visually align with light closets, garage panels, or desks, so the finished cable opening blends into white or light surfaces.
This 6610-010 model is one of eleven sizes in the series, which range from 3/4 inch to 3-1/2 inch bore hole diameters, allowing coordinated openings across a project.
The 6610 1-1/4" 2-Piece Cable Grommet, White from Hardware Concepts, Inc. pairs a grommet cap and hole liner around a 1-1/4 inch bore hole diameter, giving cable openings a finished edge in shelf, closet, garage, and multimedia workspace applications. At Wurth Baer Supply, this round plastic grommet sits within a broader grommets lineup, so this specific white 1-1/4 inch option can be chosen where that bore size and neutral finish align with planned panel cutouts and visual requirements.
Sold In: 1 Each
