Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 1-1/4 round plastic grommet gray identifies a two piece plastic grommet from Hardware Concepts, Inc. that is built around a 1-1/4 inch bore hole. This positions it as a sized solution whenever a 1-1/4 inch round hole is machined for routing wires in a shelf, closet, multimedia, or workspace panel. The part is described as a round wire grommet, so its geometry supports pulling cords through a fixed opening rather than leaving a raw edge. The gray color gives a neutral look that blends with many panel finishes, which matters when routing cables in visible cabinetry or work surfaces. The product is identified by manufacturer part 6615-021, giving installers and shops a consistent reference when repeating orders or matching it within project takeoffs.
The web description states that this grommet is sized to a 1-1/4 inch bore hole diameter, so it is intended for installations where that specific hole size is drilled or machined. Matching the bore diameter means the hole liner can seat properly in the panel cutout, which supports a snug fit without excessive play at the edge. Because the grommet is round and belongs to a family of sizes ranging from 3/4 inch to 3-1/2 inch bore holes, woodshops and installers can coordinate boring operations and grommet selection on a drawing or cut list. This alignment between bore size and grommet liner helps keep wire pass-throughs consistent across a run of cabinets, desks, or closet components.
The product is categorized under shelf, closet and garage organization as well as multimedia and workspace components, so it is intended for panels and surfaces in those environments where wires need to pass through a round cutout. The web description identifies it as a round wire grommet, tying its primary role to guiding and protecting wires as they pass through a 1-1/4 inch bore hole. Because the style uses a separate hole liner and cap, it can be used where a finished edge around the bore is desired, such as in worktops, closet panels, or garage cabinetry. The gray color described in the SAP entry makes it suitable for installations where a neutral tone is preferred around cable openings in desks or equipment stations.
The description notes that this style grommet has two pieces, a cap and a hole liner, so each component plays a defined role around the 1-1/4 inch bore. The hole liner sits directly in the drilled opening, which shields the bore edge and provides a uniform surface where cords contact the panel. The cap then covers the liner and features the pivot hinge hole for wire, concentrating the cable opening in a controlled location at the top of the grommet. That pivot hinge hole gives the cap a movable opening for wires, allowing cables to pass while much of the bore remains covered for a tidier look on work surfaces. Because the part is made as a 2PC 1-1/4 inch round plastic grommet, installers can align the hole-making step with the chosen grommet size and expect the cap and liner to work together to dress the opening.
The Hardware Concepts, Inc. 6615-021 round wire grommet is described as a 1-1/4 inch round plastic grommet, so it is intended for use in panels bored to a 1-1/4 inch diameter.
The round wire grommet style has a separate hole liner that sits in the bore and a cap that covers it, so the liner protects the hole edge while the cap presents the finished wire opening.
The cap of this style grommet has a pivot hinge hole for wire, so the opening can pivot to admit cords while keeping the rest of the bore visually closed around the cable path.
The product is categorized for shelf, closet and garage organization and multimedia and workspace components, so it suits wire pass-throughs in those cabinetry and work surface applications.
The SAP description calls this item a 2PC 1-1/4 inch round plastic grommet gray, so it identifies a plastic construction in a gray finish for neutral-looking wire openings.
The web description notes these round wire grommets are available for 3/4 inch to 3-1/2 inch bore holes, so the 1-1/4 inch version fits within that size range for matching bored openings.
The Hardware Concepts, Inc. 6615-021 two piece round wire grommet offers a plastic cap and hole liner sized for a 1-1/4 inch bore hole and finished in gray. Its pivot hinge hole in the cap provides a controlled path for wires while keeping the rest of the bore covered, which supports cleaner cable routing in shelf, closet, garage, and workspace panels. For projects using a 1-1/4 inch round bore to route cords, this specific part number gives a defined way to finish the opening with a neutral-toned, wire-focused grommet.
Sold In: 1 Each
