Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 1-3/4 Round Plastic Grommet Brown is a two piece plastic wire grommet from Hardware Concepts, Inc. that fits a 1-3/4 inch bore hole, so it lines a drilled opening to control wire pass-through in desks or cabinetry. The round grommet design manages wires where you have a matching bore hole diameter, which keeps edges covered and wiring routed through a defined point. The two piece construction, described as a grommet cap and hole liner, creates a finished rim and interior sleeve around the hole, so the bore surface stays shielded during daily use. The brown color option lets you coordinate this grommet with similar finishes, which helps the wire pass-through blend into work surfaces or panels. As part of a range that spans 3/4 inch to 3-1/2 inch bore hole sizes, this specific 6626-058 part targets applications calling for a 1-3/4 inch opening.
The 2PC 1-3/4 Round Plastic Grommet Brown is specified for a 1-3/4 inch bore hole diameter, so it drops into a hole drilled to that size for a consistent fit. The two piece plastic construction, made up of a grommet cap and hole liner, means the liner occupies the bore while the cap snaps or seats over it, so both panel faces around the opening become finished. Because this style grommet belongs to a series spanning 3/4 inch to 3-1/2 inch bore hole diameters, an installer can select the 6626-058 part when the project calls for a 1-3/4 inch opening, aligning the wire pass-through to standard drilling operations in panel work.
The Hardware Concepts, Inc. 6626-058 round wire grommet is categorized under shelf, closet and garage organization as well as multimedia and workspace components, so it suits panel installations in those environments where wires pass through work surfaces or vertical panels. The 1-3/4 inch bore hole size aligns with common drilling dimensions used in cabinetry and workspace build-outs, which lets this grommet sit cleanly in desk tops, shelf panels, or closet structures. The brown color option fits projects using similar tones, so wire routes in darker workstations, storage areas, or garage cabinetry can use this part without drawing attention away from the surface.
The two piece design, made of a grommet cap and hole liner, supports repeatable installations because the liner first defines the bore interface, then the cap completes the opening, so each hole presents the same finished edge. The cap features a pivot hinge hole for wire, which creates a controlled path for cables through the center of the grommet rather than along the cutout edge, helping maintain a tidy route. Since this style of grommet is part of a family covering eleven bore hole diameters from 3/4 inch to 3-1/2 inch, shops can standardize on the Hardware Concepts series and assign the 6626-058 part wherever a 1-3/4 inch opening is drilled. The seven available color options in the series allow consistent visual results across different panels by matching grommet color to surrounding materials in each installation.
The Hardware Concepts, Inc. 6626-058 grommet is described as a 2PC 1-3/4 round plastic grommet, so it is intended for a 1-3/4 inch bore hole diameter in panels.
The 6626-058 grommet uses a cap and hole liner, so the liner fits inside the bore hole while the cap finishes the surface, creating a complete wire pass-through opening.
This style grommet has a cap with a pivot hinge hole for wire, so cables pass through the hinged opening and follow a defined route through the center area.
The Hardware Concepts, Inc. grommet series offers eleven sizes from 3/4 inch to 3-1/2 inch bore hole diameter, and the 6626-058 part corresponds to the 1-3/4 inch size.
These grommets are available in seven colors, and the SAP description identifies the 6626-058 as a brown 2PC 1-3/4 round plastic grommet.
The 6626-058 round wire grommet is listed under grommets within multimedia and workspace components, so it aligns with desk and work surface wire routing tasks.
The Hardware Concepts, Inc. 2PC 1-3/4 Round Plastic Grommet Brown pairs a grommet cap and hole liner with a pivot hinge hole for wire, so a 1-3/4 inch bore hole gains a finished, guided pass-through. For projects matching that bore diameter and using brown finishes, this 6626-058 part number provides a consistent round wire grommet solution within the broader Hardware Concepts size and color series.
Sold In: 1 Each
