Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 3 inch round plastic grommet gold describes a two-piece round wire grommet from Hardware Concepts, Inc. that manages wires through a bore hole, so cables can pass cleanly through desks, cabinets, or workstations without a raw edge. This style grommet has two pieces, a grommet cap and a hole liner, creating a finished ring that covers the cutout and supports the wire path. The cap has a pivot hinge hole for wire, letting cables route through an opening in the cap while the rest of the cap stays in place, which keeps the hole covered while still allowing access for cords. These grommets are part of a range designed for bore hole diameters from 3/4 inch to 3-1/2 inch, so the series supports different panel layouts and cable loads. The gold plastic finish identifies this model visually, which helps match it to hardware and surface details on the job.
The round wire grommets series is designed for bore hole diameters from 3/4 inch to 3-1/2 inch, so installers can plan cutouts to known diameters and then pair them with the matching size in the line for a consistent fit. The 2PC 3 inch round plastic grommet gold configuration follows the same two-piece approach, using a cap and hole liner sized for its bore hole so the liner nests in the cutout and the cap seats to form a flush surround. Because the cap has a pivot hinge hole for wire, the exit point for cables is integrated into the cap itself, which keeps the wiring pass-through predictable when laying out equipment, power points, or data drops around the opening.
The Hardware Concepts, Inc. 6650-075 part number refers to a 2PC 3 inch round plastic grommet gold within a broader round wire grommets family, so it fits workflows where wire management is built around known bore hole diameters. Because the series covers eleven different bore hole sizes from 3/4 inch to 3-1/2 inch, layouts spanning smaller fixture panels through larger work surfaces can all draw from the same style, which simplifies planning when multiple stations share a similar look. The grommet cap and hole liner design means the liner occupies the bore hole while the cap presents the finished face, so edges of the cutout are hidden and wiring is guided through a controlled opening. The gold color option lets this model align with surrounding hardware tones or decorative trims on desks, cabinetry, or media furniture where a metallic look is preferred along with a plastic body.
The two-piece plastic construction with a separate grommet cap and hole liner allows the liner to stabilize in the bore hole, while the cap handles the visible surface and the pivot hinge hole for wire, which simplifies routing cables through the center or toward an edge. Because this style grommet has a pivot hinge hole for wire, installers can orient the cap so the wire opening lines up with the equipment position, helping organize power cords, data leads, or audio lines without leaving open cutouts. The availability of seven colors within the product line means the same structural approach can be used while adjusting color from job to job, which is useful when aligning with different finishes across offices, closets, or multimedia locations. Identifying this model as 2PC 3 inch round plastic grommet gold and Hardware Concepts, Inc. 6650-075 gives a consistent reference when matching existing stations or specifying parts for repeat work in a series of similar installations.
The Hardware Concepts, Inc. 6650-075 grommet manages wires through a bore hole using a two-piece cap and liner, creating a finished cable pass-through in desks, cabinets, or work surfaces.
The grommet uses two pieces, a grommet cap and a hole liner, so the liner fits in the bore hole while the cap forms the visible surround and supports the wire opening.
The pivot hinge hole for wire lets the cap provide a fixed cover while still offering a rotating opening, so cables pass through in a controlled location without removing the cap.
The round wire grommets family is available in eleven sizes from 3/4 inch bore hole diameter to 3-1/2 inch, matching a range of typical cutouts in furniture and fixtures.
The 2PC 3 inch round plastic grommet gold is one size within the series that spans 3/4 inch to 3-1/2 inch bore holes, aligning with projects that use a corresponding larger cutout.
This style of round wire grommet is available in seven colors, so the same grommet design can be selected to coordinate with surrounding finishes or hardware tones.
The 2PC 3 inch round plastic grommet gold from Hardware Concepts, Inc., identified as part number 6650-075, offers a two-piece cap and liner layout with a pivot hinge hole for wire, so it supports neat cable routing through a sized bore hole. With round wire grommets available in eleven bore hole diameters from 3/4 inch to 3-1/2 inch and in seven colors, this line lets you match cutout size and finish while keeping a consistent working design. For builds or upgrades that call for a 3 inch round wire grommet, this gold plastic option fits within that coordinated series for streamlined planning and repeat use.
Sold In: 1 Each
