Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 3/4" round plastic grommet white describes a two piece plastic grommet from Hardware Concepts, Inc. that is built around a 3/4 inch bore hole diameter, so it fits standard drilled openings for routing wires in cabinets, desks, or workstations. The round wire grommets design uses a separate grommet cap and hole liner, which lets the liner seat in the bore while the cap finishes the opening, giving a cleaner edge around the cutout. The grommet cap has a pivot hinge hole for wire, so the opening can swing to allow cables through and then pivot back, helping cover the hole and control the wire path. This two piece plastic construction defines the product as part of the Hardware Concepts, Inc. 6605-010 series, tying it directly to a repeatable bore size and appearance when matching other sizes in the same line.
The 3/4 inch bore hole diameter described for this Hardware Concepts, Inc. round wire grommet defines the cutout size the hole liner is intended to occupy, so drilling to that diameter gives the liner a defined seat in the panel. The separate grommet cap then presses over the liner, completing the round edge and visually reducing the raw hole around cables. Because these grommets are part of a size range running from 3/4 inch to 3-1/2 inch bore hole diameters, a shop can align drilling patterns across different locations while choosing the matching grommet size from the same series for each opening. The white plastic construction referenced in the SAP description anchors the finish choice, so installers know they are selecting a light, neutral color when coordinating with shelving, closet components, or multimedia work surfaces.
This style grommet is categorized under shelf, closet and garage organization, multimedia and workspace components, and grommets, which positions it for projects where wires pass through panels in storage systems and work areas. The 3/4 inch bore hole diameter makes this Hardware Concepts, Inc. 6605-010 part a fit for smaller cable clusters and individual power or data leads, so it works well in compact panels, vertical dividers, or narrow shelves. The round wire grommets design with a grommet cap and hole liner suits flat panel materials commonly used in cabinetry and workspace components, letting the liner occupy the drilled opening while the cap presents a finished ring for visible surfaces. Because these grommets are available in eleven different sizes up to 3-1/2 inch bore hole diameter, a shop can assign smaller sizes for single cable pass-throughs and larger sizes from the same family for heavier wire bundles on the same project line.
The cap has a pivot hinge hole for wire, so the opening can be rotated as needed when cables are fed or repositioned, helping maintain a controlled slot instead of a fully open hole. This pivot hinge hole for wire feature supports neater routing during installations or later changes, since the hinged portion can move with the conductors rather than leaving an irregular gap. The fact that these grommets are available in seven colors lets planners map color choices to specific environments, such as matching white plastic to light closets or office furniture, which keeps visual consistency across multiple openings. The manufacturer part number 6605-010 gives installers a precise reference when repeating orders or matching existing installations, so subsequent projects can reuse the same 3/4 inch bore hole grommet specification. Sold in both broken and full box quantities with a discount available for full box quantities, this grommet supports single-job needs and higher volume shop programs using the same wire routing solution.
The 3/4 inch bore hole diameter specifies the cutout the hole liner is designed to fit, so drilling that size opening lets this Hardware Concepts, Inc. grommet seat properly in the panel.
The two piece plastic design uses a liner in the bore hole and a cap over it, so the liner anchors in the panel while the cap finishes the edge and frames the wire opening.
The pivot hinge hole for wire lets the cap opening swing with the cable path, so wires can pass through while the hinged section helps cover the hole and guide routing.
The 6605-010 grommet is one of a series available in eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameter, so related holes can use matching designs.
The SAP description states 2PC 3/4" round plastic grommet WHT, indicating a white plastic two piece construction, which provides a light neutral finish around cable openings.
The Hardware Concepts, Inc. 6605-010 grommet is sold in both broken and full box quantities, with a discount available for full box quantities, supporting small and larger jobs.
The 2PC 3/4" round plastic grommet white from Hardware Concepts, Inc. combines a grommet cap and hole liner sized for a 3/4 inch bore hole, so it organizes wire pass-throughs while finishing the opening. The pivot hinge hole for wire in the cap offers a defined cable path that can move as conductors are adjusted, which supports cleaner layouts in shelving, closets, and multimedia work areas. With eleven different sizes in the same style and seven colors available, this 6605-010 model aligns with projects needing consistent grommet design across multiple hole diameters. For jobs calling for a white plastic round wire grommet tied to the 3/4 inch bore dimension, this part number provides a clear, repeatable choice.
Sold In: 1 Each
