Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 3-1/2 round plastic grommet gray describes a two piece plastic wire grommet from Hardware Concepts, Inc. that fits a 3-1/2 inch bore hole, so you can plan cutouts and layouts around a known hole size. This round wire grommet sits in the bore hole as a cap and liner, giving the wire pass-through a finished edge instead of an exposed cutout. The grommet design is part of a broader line covering 3/4 inch to 3-1/2 inch bore hole diameters, so you can match this gray unit with other sizes on the same project. The wire grommet belongs to the Multimedia and Workspace Components group, tying it directly to desks, counters, and work surfaces where cords and cables pass through. The gray color option lets you coordinate with gray worktops and cabinets when visual consistency matters across multiple openings.
The 2PC 3-1/2 round plastic grommet gray is sized for a 3-1/2 inch bore hole diameter, so the drilling step revolves around that single measurement when preparing a surface opening. Using a dedicated 3-1/2 inch bore hole keeps the cap and liner seated properly, which helps the wire pivot opening in the cap stay in the intended position. Because this style grommet is part of a broader 3/4 inch to 3-1/2 inch bore hole range, you can standardize tooling across a project while still changing grommet sizes as needed. The plastic construction ties directly to typical woodworking and laminate work surfaces, fitting naturally into holes drilled in cabinet-grade substrates.
The Hardware Concepts, Inc. 6660-021 round wire grommet is categorized under Shelf, Closet & Garage Organization and Multimedia and Workspace Components, so it aligns with installations where wires pass through shelves, desktops, or work counters. The two piece construction - grommet cap and hole liner - suits openings in cabinets and workstations where both the top edge and the inner wall of the bore hole need a finished look. Because the cap has a pivot hinge hole for wire, it is particularly suited to routing cords from equipment on the surface down through the bore hole, keeping the exit point defined instead of a wide open cutout. The gray color option supports layouts that use gray shelving or work surfaces, helping the opening visually tie into the surrounding hardware and panel finishes on the job.
The cap with pivot hinge hole for wire focuses the cord path through a controlled opening, so cables can be directed in a single channel rather than sprawling across the grommet edge. The plastic material of the grommet gives the interface around the wires a consistent, molded surface, which matters when wires rest against the bore hole over time. By pairing a cap and hole liner in the same unit, the 6660-021 grommet keeps the raw cut of the 3-1/2 inch bore hole covered on all sides, supporting repeatable, neat results across multiple desks or stations. Working within a family of eleven grommet sizes means this 3-1/2 inch version can be deployed alongside smaller openings while still maintaining the same general style and workflow on a project.
The 2PC 3-1/2 round plastic grommet gray is designed for a 3-1/2 inch bore hole diameter, so drilling to that dimension aligns the opening with the cap and liner.
The Hardware Concepts, Inc. 6660-021 grommet has two pieces, a grommet cap and a hole liner, which together cover both the top surface and the inner wall of the bore hole.
The cap has a pivot hinge hole for wire, directing cords through a specific opening in the cap so the wire path is more controlled at the work surface.
This style grommet is available in eleven different sizes from 3/4 inch bore hole diameter to 3-1/2 inch bore hole diameter, allowing different openings to share the same design family.
The SAP description identifies the 2PC 3-1/2 round plastic grommet gray as plastic, so the wire interface is a molded plastic surface.
The SAP description specifies this 6660-021 model as gray, letting it coordinate visually with gray shelving, worktops, or cabinetry.
The 2PC 3-1/2 round plastic grommet gray brings a cap and hole liner solution tailored to a 3-1/2 inch bore hole, matching projects built around that cutout size. With a pivot hinge hole for wire and gray finish, it suits multimedia and workspace layouts that route cords through desks, shelves, or counters. When a job calls for a plastic round wire grommet in the Hardware Concepts, Inc. family, this 6660-021 model aligns with gray 3-1/2 inch openings across your installation.
Sold In: 1 Each
