
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
3-1/4 inch 2-piece cable grommet from Hardware Concepts, Inc. gives a finished opening for wires where a 3-1/4 inch bore hole is used, so cable passes through desks or work surfaces with a neat, defined edge. The grommet is a two-piece design with a cap and separate hole liner, which creates a continuous plastic surface around the bore, reducing abrasion on cable jackets over time. Its gray color coordinates with typical office and shop furniture finishes, supporting visually consistent workstations or multimedia stations. As part of the grommets product class within multimedia and workspace components, this part is suited to routing data, power, or audio leads through shelves, closet systems, or worktops. The 6650-021 manufacturer part number identifies this specific gray 3-1/4 inch version in the 6650 series, which helps standardize cutout sizing and repeat the same solution across multiple stations.
This grommet is designed for a 3-1/4 inch bore hole diameter, so the cutout size is established before installing the liner, supporting consistent drilling with standard hole saws across a run of cabinets or desks. The two-piece format with a dedicated hole liner means the liner seats into the bore first, then the cap drops into that liner, which can streamline installation when repeating the process on multiple work surfaces. Because the cap incorporates a pivot hinge hole for wire, the installer or fabricator can orient the cable opening toward a wall, equipment, or cable tray, improving how cords fall away from the opening. As part of the multimedia and workspace components category, this installation style fits typical office, shop, or closet organization builds where clean-through routing is needed.
This 6650 3-1/4 inch 2-piece cable grommet, gray, is classified under shelf, closet and garage organization as well as multimedia and workspace components, so it suits desks, counters, and storage systems that carry electronics. The round plastic grommet format fits situations where wires must pass between the front and back of furniture, such as from power strips to devices, while covering the raw 3-1/4 inch bore hole. Its gray color allows it to sit in modern office furniture, light shop benches, or closet organizers without drawing attention, so the focus stays on equipment and layout rather than cutouts. As a member of the broader 6650 series that ranges from 3/4 inch to 3-1/2 inch bore hole diameters, this 3-1/4 inch model can be selected alongside other sizes in the series to handle different cable bundles while keeping a consistent visual style.
The manufacturer part number 6650-021 identifies this exact gray 3-1/4 inch bore variant, which is useful when specifying the same cutout size and appearance across multiple jobs or facilities. Since these grommets are available in eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameter, a layout can be planned so smaller or larger openings are matched to cable volume while keeping the same cap-and-liner style. The cap with a pivot hinge hole for wire provides an adjustable opening, so cables can exit in a targeted direction without leaving the bore fully exposed, helping maintain a cleaner look on the work surface. Being a plastic grommet within the multimedia and workspace components category, it integrates naturally into projects for data centers, offices, or workshop benches that route cords through shelves or tabletops.
The 6650 3-1/4 inch 2-piece cable grommet fits a 3-1/4 inch bore hole diameter, so drilling to that size sets the opening for installing the liner and cap.
The two-piece design with cap and hole liner surrounds the cut edge, so cables contact smooth plastic instead of raw substrate as they move through the hole.
The cap's pivot hinge hole for wire allows the opening to be rotated toward the cable path, guiding cords while keeping most of the bore covered.
This gray plastic cable grommet is categorized for shelf, closet and garage organization and multimedia and workspace components, fitting desks, counters, and storage with routed wiring.
The 6650-021 part number designates the gray 3-1/4 inch bore version in the 6650 series, helping specify the same size and color consistently.
This style of grommet is available in eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameter, allowing different cutouts to share the same look.
The 6650 3-1/4 inch 2-piece cable grommet, gray, from Hardware Concepts, Inc. provides a plastic cap and liner solution for a 3-1/4 inch bore hole where wires pass through furniture or organization systems. Its cap with pivot hinge hole for wire gives a controlled cable exit point that keeps the opening visually clean. With eleven sizes available in this 6650 style and seven color options in the series, this gray 6650-021 model fits projects that standardize on a 3-1/4 inch round opening. Use this grommet when a finished edge, consistent cutout size, and directional cable pass-through all matter on multimedia, office, or storage installations.
Sold In: 1 Each