Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 3-1/4 Round Plastic Grommet describes a two piece plastic grommet designed to finish a 3-1/4 inch bore hole in desks, cabinets, or work surfaces while managing wires. The product consists of a round grommet cap and a matching hole liner, so the cutout edge is covered top and side for a cleaner, more controlled opening. The grommet cap has a pivot hinge hole for wire, allowing cables to pass through a defined opening while the rest of the hole stays covered. This round wire grommet design helps organize cords in multimedia and workspace components, keeping runs passing through a single pivoting opening instead of a raw cutout. Made as a plastic grommet, it suits typical woodworking and interior workspace environments where metal is not required.
This Hardware Concepts, Inc. round wire grommet is specified for a 3-1/4 inch bore hole, so installers drill that hole size to receive the liner section. The hole liner drops into the bore and covers the sidewall, establishing a neat edge around the full circumference. The separate grommet cap then seats into the liner, so the visible surface shows a finished round ring instead of raw material. The pivot hinge hole for wire in the cap becomes the path for cables, directing them through the work surface without leaving a large open cutout. Using the defined bore size with the matched cap and liner helps achieve a consistent fit when repeating the same grommet across several panels.
This two piece plastic grommet serves multimedia and workspace components that route power, data, or equipment leads through a horizontal or vertical panel. The 3-1/4 inch bore hole size aligns with larger cable clusters common in desks, workstations, and closet or garage organization panels. In these setups, the hole liner portion manages the raw panel edge while the grommet cap finishes the top view where users see the opening. The pivot hinge hole for wire in the cap lets cords bend through a smaller opening than the full bore, which is helpful on panels carrying a moderate bundle that still benefits from a larger drilled hole for ease of boring and alignment during shop work.
The combination of a grommet cap and hole liner means this product creates a two-stage interface: the liner establishes the structural fit in the drilled 3-1/4 inch bore, and the cap provides the controlled cable exit and finished surface. That separation helps when panels vary slightly in thickness, because the liner manages the side contact while the cap focuses on the visible edge and pivot hinge hole for wire. The round wire grommets family spans bore holes from 3/4 inch to 3-1/2 inches and seven colors, so shops can standardize on a single design approach while scaling hole size and color to the furniture line. Using the 6655-014 black version ties those system-level options to a specific, repeatable grommet for larger openings.
The 6655-014 two piece plastic grommet is specified for a 3-1/4 inch bore hole, so drilled openings at that diameter are matched to the liner for a consistent round fit in panels.
The grommet cap seats into the hole liner installed in the 3-1/4 inch bore, so the liner covers the sidewall and the cap finishes the top surface around the wire opening.
The pivot hinge hole for wire in the cap provides a smaller, controlled passage for cables through the larger bore hole, which keeps cords gathered as they exit the surface.
This round wire grommet style is available in eleven bore hole diameters from 3/4 inch to 3-1/2 inches, allowing the same design to be used across multiple hole sizes.
The round wire grommets are available in seven colors, and the 6655-014 version is a black round plastic grommet suited to darker furniture and workspace finishes.
The 6655-014 round wire grommet is produced by Hardware Concepts, Inc., providing a defined part number for ongoing projects that require the same 3-1/4 inch opening.
This Hardware Concepts, Inc. 6655-014 product pairs a 3-1/4 inch bore hole liner with a matching round grommet cap, giving a defined path for cables through a pivot hinge hole for wire. The black, two piece plastic design fits multimedia and workspace components that need a larger drilled opening but a controlled wire exit. For desks, closets, or garage organization projects that call for a 3-1/4 inch round wire grommet, this part provides a repeatable, size-specific solution.
Sold In: 1 Each
