Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 1 inch round plastic grommet gray from Hardware Concepts, Inc. provides a simple wire pass-through solution using a round grommet cap and matching hole liner, so cables route through a 1 inch bore hole with a finished edge. The two-piece plastic construction, described as cap and liner sold together, creates a defined opening that helps keep wires grouped at the point where they pass through the surface. The grommet cap has a pivot hinge hole for wire, allowing the opening to swing into position, so installers can position cables without cutting a separate slot. Being part of a line of round wire grommets sized for bore holes, this 6610-021 model aligns with a 1 inch bore hole diameter within the broader 3/4 inch to 3-1/2 inch range, helping standardize drilling. The gray color option supports visual consistency where a neutral tone is preferred.
The round wire grommets series from Hardware Concepts, Inc. is defined by bore hole diameter, with this 6610-021 part described as a 2PC 1 inch round plastic grommet gray, so drilling a 1 inch bore hole matches the intended fit. The mention of eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameter shows this product follows the same sizing logic, helping users apply the same measuring approach across related grommets. Because the style is a grommet cap and hole liner, the drilled bore hole serves as the structural opening while the plastic components finish the edge and guide wires. The cap pivot hinge hole for wire focuses the actual cable path, so the bore hole can be sized for clearance while the hinge opening directs the wire bundle.
The round wire grommets are classified under Multimedia and Workspace Components and Shelf, Closet & Garage Organization, so the 2PC 1 inch round plastic grommet gray fits environments where wires pass through panels or furniture surfaces in organized storage or work areas. Being part of a grommet product class, the 6610-021 grommet is intended to sit in a bore hole and provide a defined route for cables, which supports clean wire transitions on desktops, shelving panels, or closet components. The gray color option can blend with many neutral surface finishes found in closets, shelving, and workspaces, which helps installations look consistent. Because the cap and hole liner style finishes the cut edge, this grommet helps separate the rough bore hole surface from the cables as they pass through. The pivot hinge hole for wire at the cap concentrates the wire path, which guides cables toward a single point rather than spreading across the full bore diameter. Since the line covers eleven bore hole sizes up to 3-1/2 inches, this 1 inch version occupies the smaller end of the range, suitable where a compact opening is preferred at the pass-through location.
The description that this style grommet has two pieces, a grommet cap and hole liner, defines how the product functions once installed, because the liner fits into the bore hole while the cap sits on top to present the visible opening. This cap-and-liner structure allows the 1 inch bore hole to be both structurally sized for the panel and visually finished with a uniform plastic edge, which benefits repeated installations on similar panels. The cap has a pivot hinge hole for wire, meaning the opening can swing on the hinge rather than being a fixed slot, so installers can route wires through, then close the pivot area to tighten the visible opening. The fact that these grommets are part of a family available in eleven different sizes, from 3/4 inch to 3-1/2 inch bore hole diameter, helps standardize layout planning, since hole diameters follow a predictable series. Availability in seven colors means the same cap and liner design can be matched to different surface colors on projects, so the installation can be aligned to a chosen visual theme. The SAP description 2PC 1 inch ROUND PLASTIC GROMMET GRY and manufacturer part 6610-021 provide a consistent identifier, which simplifies specifying the same grommet across drawings, orders, and repeat jobs.
The 6610-021 part is described as a 2PC 1 inch round plastic grommet gray, so it is aligned to installations using a 1 inch bore hole diameter.
The round wire grommet uses a cap and hole liner, with the liner fitting into the bore hole and the cap finishing the opening where wires pass through.
The cap has a pivot hinge hole for wire, allowing the opening to move on the hinge so cables can be guided through while the cap remains attached at the surface.
The round wire grommets series is available in eleven different sizes from 3/4 inch bore hole diameter to 3-1/2 inch bore hole diameter, supporting varied cable groups.
The grommets are available in seven colors, allowing selection of a tone that aligns with the surrounding surface or project design.
The manufacturer part 6610-021 and SAP description 2PC 1 inch ROUND PLASTIC GROMMET GRY specify a two piece, 1 inch round gray plastic wire grommet for consistent ordering.
The 2PC 1 inch round plastic grommet gray from Hardware Concepts, Inc. pairs a grommet cap and hole liner with a pivot hinge hole for wire, giving a controlled pass-through at a 1 inch bore hole diameter. Within the eleven-size round wire grommets series and seven color options, this gray 6610-021 part offers a defined way to route cables through panels or workspace components using a compact, standardized opening. For projects using panel drilling and wire management in multimedia or storage environments, choosing this cap-and-liner style helps create a consistent finished edge and a focused cable path at each 1 inch bore hole location.
Sold In: 1 Each
