
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
3-1/4 inch 2-piece cable grommet gives a clean pass-through point for wires in desks, cabinets, and work surfaces. The round plastic design organizes cables at the cutout, which keeps openings tidy where wiring passes through wood or laminate. Hardware Concepts, Inc. brands this part as 6650 3-1/4 inch 2-Piece Cable Grommet, White, so installers can reference a consistent identifier across projects. The white finish lets the grommet blend into light-colored tops, which helps maintain a uniform appearance on visible work surfaces. This style grommet has two pieces, a grommet cap and a hole liner, so the bore hole edge is shielded while the opening remains usable. The grommet is part of a series offered in eleven different sizes from 3/4 inch bore hole diameter to 3-1/2 inch bore hole diameter, which supports layout planning when several hole sizes are required on the same job.
The 3-1/4 inch 2-piece cable grommet is designed for a 3-1/4 inch bore hole diameter, so the installer drills a round opening sized to that dimension before seating the liner. This style grommet has a separate hole liner, which drops into the bore so the panel thickness is bridged by a continuous plastic sleeve. The grommet cap then finishes the top side, so the visible surface shows a neat round trim ring. Because the cap has a pivot hinge hole for wire, the opening can be rotated relative to cable direction, which helps line up the pass-through with equipment locations on the work surface. The round plastic form matches typical hole saw cuts, which fits common shop drilling methods for desks, counters, and cabinets.
The 6650 3-1/4 inch 2-Piece Cable Grommet, White, fits projects that call for a 3-1/4 inch bore hole diameter in wood or composite panels, so it serves typical desk and countertop wire drops. As a round plastic grommet from the Hardware Concepts, Inc. multimedia and workspace components group, it suits installations where data, power, or AV cables need to pass through a finished top. The white color aligns with light office furniture finishes, so it visually recedes on many commercial workstations and home office desks. Because this style grommet has two pieces, grommet cap and hole liner, it works well where both the face and inside of the bore are visible or may contact cable jackets. The cap has a pivot hinge hole for wire, so the opening can sit toward the equipment side of the desk, which supports neat routing to monitors, phones, or charging points.
The two-piece design, with separate grommet cap and hole liner, means the bore edge is protected along its full depth, which matters when pulling or repositioning wires through the same opening repeatedly. The liner shields cable jackets from direct contact with the cut panel, so conductors slide more smoothly during moves or service. The cap has a pivot hinge hole for wire, so installers can swing the opening around existing bundles rather than threading every lead from scratch, which reduces handling time when gear changes. Having this style grommet available in eleven different sizes from 3/4 inch bore hole diameter to 3-1/2 inch bore hole diameter also simplifies standardization: once a team locks in hole saw sizes, similar 2-piece units can be used across small device leads and larger harnesses. The SAP description 2PC 3 inch ROUND PLASTIC GROMMET WHT ties the 6650-010 part to internal documents, which supports repeat ordering when building matching stations.
The 6650 3-1/4 inch 2-piece cable grommet fits a 3-1/4 inch bore hole diameter, so drilling to that size provides the correct opening for the liner and cap.
The 2-piece design uses a hole liner inside the bore and a cap at the surface, so both the cut edge and top face are finished where cables pass through.
The pivot hinge hole in the cap swings around cables, so the opening can be oriented toward equipment while wires stay in place during layout changes.
The 6650-010 style grommet is part of a group available in eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameters, supporting varied cutout requirements.
The SAP description lists it as a 2PC 3 inch ROUND PLASTIC GROMMET WHT, indicating a round plastic construction suited to typical desk and cabinet bores.
The white finish of the 6650 3-1/4 inch 2-piece cable grommet blends with light work surfaces, so wire pass-through points integrate visually with many office layouts.
The 6650 3-1/4 inch 2-piece cable grommet, white, aligns with projects needing a 3-1/4 inch bore hole diameter and a finished wire pass-through. The two-piece style, with grommet cap and hole liner plus pivot hinge hole for wire, supports clean routing and repeat cable adjustments. For desks, counters, and cabinets planned around standard round cutouts, this round plastic grommet provides a defined pass point that keeps wiring organized at the work surface.
Sold In: 1 Each