
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
2-piece cable grommet black from Hardware Concepts, Inc. brings a grommet cap and hole liner together as a matched pair for clean cable pass-throughs in desks, workstations, and multimedia furniture, so wire cutouts look finished instead of rough. The 6626-014 model is described as a 2PC 1-3/4' ROUND PLASTIC GROMMET BLK, meaning it is a round plastic unit sized for a 1-3/4 inch bore hole diameter, which helps installers match their drilling pattern to the correct grommet. This style grommet has two pieces; grommet cap and hole liner, so the drilled edge is fully surrounded by plastic rather than exposed substrate, supporting a neater appearance around the full circumference. The cap has pivot hinge hole for wire, which lets cables pass while the cap remains attached and aligned, so openings stay organized when routing or adding cords over time. Available in seven colors per the broader line, this black version supports straightforward, neutral installations.
The 6626-014 model is described as a 2PC 1-3/4' ROUND PLASTIC GROMMET BLK, which signals to installers that the required bore hole diameter is 1-3/4 inch for proper fit. That sizing detail supports accurate layout before drilling, since the bore diameter governs which bit or hole saw is used across matching stations. The web description states these grommets are available in eleven different sizes from 3/4" bore hole diameter to 3-1/2" bore hole diameter, so this 1-3/4 inch version sits mid-range within the series, helping planners pair it with larger or smaller runs on the same project. Because the part is described as round plastic, hole shape is simple, and drilling into desks, shelves, or panels can follow a straightforward circular pattern without special cutting geometry.
The product is categorized under Shelf, Closet & Garage Organization and Multimedia and Workspace Components, placing this 2-piece cable grommet in typical desk, bench, or workstation environments where cables must pass through panels. The web description notes these grommets are available in eleven different sizes from 3/4" bore hole diameter to 3-1/2" bore hole diameter, so the 1-3/4 inch option can be selected for medium cable bundles on equipment stands, counters, or closet organizers. As a round plastic grommet described as 2PC 1-3/4' ROUND PLASTIC GROMMET BLK, it suits routed openings in wood or similar substrates where a neutral black finish blends with many work surfaces. This style grommet has two pieces; grommet cap and hole liner, which helps conceal cut edges on visible tops or shelves in multimedia, office, or storage layouts.
The description clearly states this style grommet has two pieces; grommet cap and hole liner, so the liner sits in the 1-3/4 inch bore to define the cable path while the cap provides the finished surface, improving the visual result and reducing rough contact at the edge. The cap has pivot hinge hole for wire, which means the opening is formed in a pivoting section of the cap rather than a fixed static gap, allowing cables to be threaded while the cap stays aligned, supporting tidier routing around the entry point. Being identified as part of the Grommets product class and Multimedia and Workspace Components category, the 6626-014 grommet is configured for organized cable transitions through desks and cabinets instead of leaving open, oversized cutouts. The variety of eleven different bore hole diameter sizes in the line lets this specific 1-3/4 inch version act as a consistent standard wherever a mid-size pass-through is needed along a cable run.
The 6626-014 is described as a 2PC 1-3/4' ROUND PLASTIC GROMMET BLK, so it is sized for a 1-3/4 inch bore hole diameter, helping match drill bits to the correct opening.
The description states this style grommet has two pieces; grommet cap and hole liner, so the liner fits the bore while the cap finishes the top edge, improving the appearance of the cable opening.
The SAP description calls it a 2PC 1-3/4' ROUND PLASTIC GROMMET BLK, indicating a round form that matches circular drilled holes in desks or panels.
The web description notes the cap has pivot hinge hole for wire, so cables pass through a hinged section while the cap stays located, helping guide cords through the surface.
The category lists Shelf, Closet & Garage Organization and Multimedia and Workspace Components, so it suits work surfaces, closet organizers, and multimedia stations needing cable pass-throughs.
The description states these grommets are available in eleven different sizes from 3/4 inch bore hole diameter to 3-1/2 inch, providing options for different cable bundle capacities.
The 6626 2" 2-piece cable grommet, black from Hardware Concepts, Inc. combines a grommet cap and hole liner to finish a 1-3/4 inch bore hole diameter, bringing a neat, round plastic edge to desk or panel cutouts. The cap has pivot hinge hole for wire, providing a defined path for cables while the cap stays in place, which supports orderly routing through work surfaces and multimedia components. With this style grommet positioned within the Grommets and Multimedia and Workspace Components categories, it suits installations where visible openings benefit from a consistent, black finished border around each cable pass-through.
Sold In: 1 Each