Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 1-3/4" round plastic grommet grey describes a two-piece round plastic wire grommet sized for a 1-3/4 inch bore hole, so installers get a defined cutout size for clean routing of cables or wires through panels. The product is part of the Round Wire Grommets line from Hardware Concepts, Inc., which places it in a dedicated series for managing wire pass-through in multimedia and workspace components. Being a grommet in the Shelf, Closet & Garage Organization and Multimedia and Workspace Components category means it is intended to finish openings where wires pass through surfaces in those environments. The plastic construction creates a non-metallic edge around the bore hole, which helps protect wire jackets while giving the opening a finished appearance. The round form factor allows straightforward drilling with standard hole saws or bits matched to the 1-3/4 inch bore size.
The designation "2PC 1-3/4" round plastic grommet" ties the product directly to a 1-3/4 inch bore hole, so drilling to that diameter sets the opening to accept this grey Hardware Concepts, Inc. part. Being a round wire grommet means the installer is working with a simple circular cutout, which suits standard woodworking and cabinet shop tooling. The plastic material supports use in multimedia and workspace components because it helps isolate wires from the panel edge as they pass through the bore hole. The cap and hole liner format defines how the opening is finished: the liner nests in the bore hole, and the cap interfaces with the liner, establishing a consistent fit around the wire path.
The Hardware Concepts, Inc. manufacturer part 6626-021 identifies this specific 2PC 1-3/4" round plastic grommet grey, so shops can repeatedly order the same size and color when building out matching workspace components. As a round wire grommet in the Multimedia and Workspace Components group, it is suited to pass data, power, or low-voltage wires through furniture or cabinetry cutouts sized to a 1-3/4 inch bore hole. The two-piece construction, with a hole liner and a grommet cap, means the bore edge is covered by the liner while the cap manages the wire opening, which creates a neater finish than a raw drilled hole. The grey color ties into the set of seven colors available in the broader line, helping projects that coordinate visible hardware tones across shelf, closet, or garage organization builds.
The grommet cap and hole liner layout turns a standard 1-3/4 inch drilled hole into a controlled wire exit point, because the liner stabilizes in the bore while the cap defines the pivot hinge hole for wire. That pivot hinge hole in the cap focuses the actual wire path through a smaller, shaped opening instead of the full bore diameter, reducing open space around the cables and sharpening the finished look. Being part of a family with eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameters allows installers to standardize on one product style while scaling hole size to match cable bundles on different stations. The classification under Shelf, Closet & Garage Organization and Grommets places this part in a role where repeatable openings and finished edges matter for both appearance and wire guidance in regular woodworking environments.
The 2PC 1-3/4" round plastic grommet grey is matched to a 1-3/4 inch bore hole, so drilling that size provides the opening this two-piece cap and liner system is designed to finish.
The grommet cap and hole liner work as a two-piece system: the liner seats in the drilled bore hole and the cap attaches to it, covering the edge and defining the wire opening.
The pivot hinge hole in the cap provides a specific opening for wires, guiding them through the grommet while limiting the exposed area of the bore hole for a tidier pass-through.
This round wire grommet is used in multimedia and workspace components and in shelf, closet, and garage organization projects where wires need a finished route through panels.
The grey 6626-021 model belongs to a series available in seven colors, so it can be selected to coordinate with other color options from the same round wire grommet family.
This 1-3/4 inch bore hole grommet is one of eleven sizes in the series, which span from 3/4 inch to 3-1/2 inch bore hole diameters to cover different opening requirements.
The 2PC 1-3/4" round plastic grommet grey from Hardware Concepts, Inc. gives shops a defined solution whenever a 1-3/4 inch bore hole is planned for wire pass-through. By using the matched grommet cap and hole liner, projects gain a controlled pivot hinge hole for wire and a finished bore edge in multimedia and workspace components. For runs needing consistent openings across shelf, closet, or garage organization layouts, this specific 6626-021 part number provides a repeatable choice within the broader eleven-size, seven-color round wire grommet family.
Sold In: 1 Each
