Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 1 inch round plastic grommet brown describes a two piece plastic grommet from Hardware Concepts, Inc. that is designed for routing wires through a round bore hole, giving a cleaner, finished pass-through in work surfaces or cabinetry. This style grommet uses a separate grommet cap and a hole liner, so the bore edge is fully lined and the opening is neatly framed, which helps protect wire jackets as they pass through the hole. The cap has a pivot hinge hole for wire, so the opening can swing to one side while still guiding the wire, which keeps the entry point more controlled during use. The product is part of the Hardware Concepts, Inc. round wire grommets line, which is offered in a range of sizes from 3/4 inch to 3-1/2 inch bore hole diameter, allowing installers to match the bore size needed on related projects.
This style round wire grommet is designed for a bore hole, so the plastic liner sits in the drilled opening and supports the cap on top, giving the opening a defined edge that helps guide drill sizing and layout. Being part of a family that covers eleven different sizes from 3/4 inch to 3-1/2 inch bore hole diameter means installers can plan hole diameters around the specific grommet size, which supports consistent layout across multiple openings. The two piece plastic construction, with a separate cap and hole liner, lets the liner register in the bore while the cap sits at the surface, which helps align the visible edge with nearby hardware or cutouts.
This round wire grommet from Hardware Concepts, Inc. is part of a multimedia and workspace components category, so it fits naturally into desks, workstations, and cabinetry where wires need to pass through a bore hole. The two piece design with grommet cap and hole liner supports use in shelf, closet, and garage organization layouts by providing a routed pass-through that keeps wire contact against plastic instead of raw panel edges. Because the cap has a pivot hinge hole for wire, it suits situations where cables exit at different angles from the surface, since the hinged opening can rotate to follow the cable direction while still presenting a defined opening. The part is designated in SAP as 2PC 1 inch round plastic grommet brown, aligning it with brown-toned surfaces where a neutral, low-contrast cap appearance is preferred in built-ins or shop fixtures.
The identification of this product as a two piece plastic round wire grommet, with both a grommet cap and a hole liner, supports repeatable results because the installer can rely on the liner to define the bore interface and the cap to define the visible edge every time. The pivot hinge hole in the cap acts as an integrated wire path, so once the bore hole is aligned to the selected size within the 3/4 inch to 3-1/2 inch series, the wire exit point is guided by the same feature on each installation, which promotes consistent cable routing across multiple units. Having this part as one of seven color options across the line means the brown version can be specified when coordinating color schemes, which simplifies repeat orders for matching replacements or for extending an existing installation. The manufacturer part number 6610-058 and the SAP description 2PC 1 inch round plastic grommet brown give an exact reference for ordering and documentation, which helps standardize this specific size and color in project notes and hardware schedules.
This style grommet is intended for a round bore hole, using a liner in the drilled opening and a cap at the surface, which creates a defined pass-through for routing wires.
The two piece plastic design uses a liner to cover the bore edge and a cap to frame the top, so wires contact smooth plastic surfaces instead of raw material as they pass through.
The cap has a pivot hinge hole for wire, which lets the opening swing as cables move, guiding the exit direction while maintaining a controlled, repeatable wire path.
The round wire grommet series is available in eleven different sizes from 3/4 inch bore hole diameter to 3-1/2 inch bore hole diameter, supporting different hole layouts.
The SAP description notes this part as a brown 2PC 1 inch round plastic grommet, so the cap can visually coordinate with brown-toned surfaces in cabinetry or work surfaces.
The manufacturer part number 6610-058 identifies this specific two piece round plastic wire grommet configuration, which supports consistent reordering and documentation on projects.
The described round wire grommet from Hardware Concepts, Inc. combines a two piece plastic layout, a pivot hinge hole cap, and a liner sized to a round bore hole, giving a defined route for cables in work surfaces. The availability of eleven bore hole diameters and seven colors across the line allows this brown 2PC 1 inch round plastic grommet configuration to be chosen where the opening size and visible finish need to match an existing layout or a planned hardware schedule. For projects that rely on repeatable wire pass-through points in cabinetry, closets, or multimedia work areas, this specific manufacturer part 6610-058 offers a consistent reference.
Sold In: 1 Each
