Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
2PC 3/4 round plastic grommet describes a two piece round wire grommet from Hardware Concepts, Inc. that is designed for a 3/4 inch bore hole, so it creates a defined pass-through point for cables in wood or panel projects. The grommet consists of a grommet cap and a hole liner, which means the edge of the bore hole is lined as well as covered, helping protect wire jackets against contact with the raw edge of the material. The cap has a pivot hinge hole for wire, allowing wires to pass through the cap at a fixed opening point, which keeps cables organized at the entry point instead of spreading across the surface. This grommet is made of plastic in a gray color, so it visually blends with common neutral finishes in workspaces and cabinets while providing a clean termination around the drilled hole.
This round wire grommet is specified for a 3/4 inch bore hole diameter, so installation revolves around drilling that size hole in the work surface, desk, panel, or cabinet part before inserting the liner. With a separate hole liner and grommet cap, the liner can be seated in the bore and then the cap positioned, which helps the opening track more accurately with the drilled hole. The cap has a pivot hinge hole for wire, so the wire path is defined by rotating the cap opening into the orientation that suits the run direction on the job, such as toward a wall, channel, or equipment. Because the grommet is plastic, it suits typical woodworking drilling methods without requiring special cutting tools for the interface beyond boring the 3/4 inch hole.
This two piece plastic wire grommet is identified in the multimedia and workspace components category, so it fits tasks where cables need to pass through shelves, closets, or work surfaces while keeping the opening organized. The 3/4 inch bore hole size aligns with smaller cable bundles or individual cords, so it works for runs where a compact opening is preferred rather than a large cutout. Being part of a line available in eleven sizes from 3/4 inch to 3-1/2 inch bore hole diameter, this specific 6605-021 version slots into layouts that have been drilled or planned at the 3/4 inch dimension, which helps standardize hole sizing across repeated units or matching panels. The gray color helps the part visually integrate into neutral or gray-toned cabinetry and workspace setups where a low-contrast appearance at the cable pass-through point is desired.
The two piece design, described as grommet cap and hole liner, supports repeatable installations because the liner defines the interface with the drilled 3/4 inch bore, while the cap finishes the opening, so multiple holes can be processed in the same way. The pivot hinge hole for wire on the cap lets the opening be oriented during use, so installers can align the wire exit relative to the run direction, which helps keep cords following consistent paths across similar workstations or cabinets. Being part of the Hardware Concepts, Inc. round wire grommets line in the grommets product class, the component behaves as a standardized pass-through fitting, so layouts that have been designed around this series can be repeated from project to project using the same 3/4 inch bore requirement. The plastic construction suits typical woodworking shop environments described by Wurth Baer Supply, where cabinet hardware and related components are installed in wood products, so it integrates into established drilling and assembly workflows.
The 6605-021 round wire grommet is specified for a 3/4 inch bore hole diameter, so layouts and drilling patterns are based around that hole size for proper fit.
The grommet uses a separate cap and hole liner, so the liner protects the bore edge and the cap finishes the surface, helping shield wire jackets and improve the opening appearance.
The cap has a pivot hinge hole for wire, so the opening guides cables through a fixed point, improving cable direction and helping keep wire runs organized at the entry.
The SAP description lists this as a 2PC 3/4 round plastic grommet gray, so it is plastic in a gray color suited to neutral workspace or cabinet designs.
The web description notes eleven sizes from 3/4 inch to 3-1/2 inch bore hole diameter, so 6605-021 is the 3/4 inch option within that size range.
The product is categorized under shelf, closet, garage organization and multimedia and workspace components, so it suits cable pass-through points in those types of installations.
The 2PC 3/4 round plastic grommet gray from Hardware Concepts, Inc. ties a 3/4 inch bore hole requirement to a finished wire pass-through, so it suits projects designed around that specific opening size. With a two piece cap and hole liner and a pivot hinge hole for wire, it provides a defined cable entry point that protects wire jackets while presenting a clean surface detail. For woodworking and workspace builds handled through Wurth Baer Supply, this round wire grommet offers a standardized way to terminate smaller cable openings wherever a gray plastic pass-through is desired.
Sold In: 1 Each
