95-Degree Swing for Thick Doors, Full Overlay Fit

This Grass Tiomos thick door hinge hangs full overlay doors up to 36mm in thickness on both face-frame and frameless cabinets, with self-close action and a dowel-mount cup for CNC and production environments.

Key Features

• Thick door geometry accommodates doors up to 36mm, handling the mass and depth a standard hinge cannot seat correctly.
• 95-degree opening angle is the engineered limit that lets a thick door swing clear without binding against the cabinet front.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving only a narrow reveal.
• Self-close spring draws the door shut automatically once released within a few degrees of closed.
• Dowel-mount cup presses into pre-bored dowel holes for fast, screwless door-side installation in a production workflow.
• Three-way adjustment dials height, side, and depth to dial in an even reveal after the cabinet is set.

Built Around the Demands of a Thick Door

A standard concealed hinge is engineered for doors in the 16 to 22mm range. Push past that into slab doors, frame-and-panel doors with thick stiles, or specialty cabinet fronts, and the cup depth, arm geometry, and opening arc all need to change. This Tiomos thick door hinge recalculates all three: the deeper cup seats the heavier door properly, the arm geometry pulls the swing path inward so the door clears the cabinet, and the 95-degree opening delivers that clearance reliably. The result is a hinge that fits the job a standard hinge cannot.

The 35mm cup bores into the back of the door using standard tooling, but the cup depth of 12.6mm and the modified arm work together for the thick-door application. The hinge arm connects to a separate Grass Tiomos base plate on the cabinet side, which is sold separately. Plates are Tiomos-series specific, so match the plate to this hinge when ordering.

Steel Construction and a Nickel Finish

The hinge is steel in a Nickel finish. In production cabinetry, the finish matters for consistency across a full run: Nickel reads clean against painted and natural wood interiors and holds up in the dry indoor environments where thick-door cabinetry typically lives. The Tiomos snap-on arm engages the plate without tools, so the door comes on and off the cabinet quickly during fitting and finishing.

Where This Hinge Belongs

Specify this hinge when the door thickness exceeds what a standard concealed hinge handles. It suits face-frame and frameless cabinets equally, so it carries across a mixed job without requiring two separate hinge specs. The dowel-mount cup fits shops running CNC boring lines where screwless cup attachment keeps the line moving. Custom cabinet makers building heavy slab doors or thick panel-and-frame fronts will find the 95-degree swing is the correct angle for the application, not a compromise. For doors in the standard 16 to 22mm range, a standard Tiomos hinge is the right pick instead.

Common Questions

The Right Hinge When the Door Is Built to Last

When the design calls for thick, substantial doors, this Tiomos hinge delivers the geometry, swing, and build quality to match them, on face-frame or frameless cabinets, in production or custom shops.