Grass Tiomos Concealed Hinge for Full Overlay Doors on Face-Frame and Frameless Cabinets

This Grass Tiomos self-close hinge mounts with standard screws and hangs full overlay doors on both face-frame and frameless cabinets, with a 110 degree opening and a spring that pulls the door shut automatically.

Key Features

• Self-close spring draws the door shut over the last few degrees so it does not stay ajar.
• Full overlay straight arm positions the door to cover nearly the entire cabinet side, leaving a narrow reveal.
• 110 degree opening angle delivers the standard swing for everyday cabinet access.
• Screw-on mounting fastens the hinge to a base plate using standard wood screws, no system holes required.
• Three-way adjustment dials height, side, and depth to bring doors to an even reveal after installation.
• Fits doors up to 24mm thick for use on standard and slightly thicker door stock.

A Dependable Mount for Full Overlay Doors

Full overlay means the door covers nearly the whole cabinet side when closed, a clean, modern look that works on both frameless box construction and traditional face-frame builds. This Tiomos hinge is built for exactly that application. The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted to the cabinet side or face-frame stile. That base plate is sold separately and must be matched to the Grass Tiomos series and your cabinet construction. With screw-on mounting, the plate goes in with standard screws rather than pressing into pre-drilled system holes, so the install is straightforward on cabinets that were not built to the 32mm system.

Steel Build in a Nickel Finish

The hinge is plated steel in a nickel finish. That combination holds up to the daily cycle of opening and closing without the arm or finish degrading. The three-way adjustment on the arm covers plus or minus a few millimeters in each direction, which is enough to correct for minor variations in cabinet or door fitting and keep every reveal consistent across a full run. Because this is a self-close hinge, the spring does the closing work. The door closes on its own once pushed past the catch point. That is the closing behavior built into this hinge.

Who Reaches for This Hinge

Contractors installing on-site in cabinets without pre-bored system holes reach for this hinge because the screw-on plate is the familiar, no-prep approach. Cabinet shops replacing hinges on existing face-frame boxes appreciate the same quality: no need to re-bore for a new plate style. It also suits remodelers specifying a single hinge that works across both frameless and face-frame boxes on the same job, since the Tiomos series runs on both. For shops or projects where a cushioned, damped close is what the customer wants, the soft-close version of this series is the right alternative. This screw-on self-close version is the working-grade pick when a reliable spring close and a no-fuss mount are the priorities.

Common Questions

A Spring Close That Works on Any Cabinet Box

Specify this hinge when full overlay doors need a reliable, self-closing mount across face-frame and frameless cabinets alike, with a straightforward screw-on install that does not depend on pre-bored production holes.