Soft-Close Precision And Shared-Partition Fit

The Grass Tiomos half overlay hinge brings integrated soft-close to doors set at a half overlay on both face-frame and frameless cabinets, including the paired doors that meet on a single center partition.

Key Features

• Integrated Tiomos soft-close damps the door over the final arc of closing so it settles quietly without impact.
• Half overlay, half crank arm positions each door to overlap the cabinet side at a partial overlay, the geometry required where two doors share one partition.
• 110 degree opening angle delivers standard everyday access on either cabinet type.
• Screw-on mounting fastens the hinge to the cabinet side or face-frame stile with wood screws for a solid mechanical connection.
• Three-way adjustment fine-tunes height, side, and depth after installation to bring doors to an even reveal.
• Works on face-frame and frameless cabinets when paired with the matching Grass base plate, sold separately.

Built for the Shared-Partition Door Pair

A half overlay hinge earns its place on the double-door cabinet, where two doors meet on one center partition and each must overlap that partition by roughly the same amount without the arms colliding inside the box. The half crank geometry on this Tiomos hinge is engineered for exactly that condition. It also suits any single door set to a partial overlay rather than a full cover of the cabinet side.

The 35mm cup bores into the back of the door at a 12.6mm depth, and the arm connects to a Grass base plate mounted to the cabinet, ordered separately. Screw-on mounting means the plate fastens with wood screws directly to the cabinet side panel or face-frame stile, a straightforward connection that does not depend on pre-drilled system holes. A compatible Grass plate is required to complete the installation. Grass plates are Grass-specific and will not interchange with plates from other brands.

Steel Build and a Nickel Finish

The hinge body is steel with a nickel finish, a durable combination for kitchen and bath cabinetry where the hardware sees daily use. The doors themselves do the telling over time: soft-close protects both the finish and the door-to-cabinet fit by eliminating the repeated impact of a hard close. The three-way adjustment range of plus or minus 3mm in height and side, and plus 3mm to minus 2mm in depth, gives enough movement to align doors cleanly after installation and again as the cabinet settles.

Where This Hinge Works Best

Reach for this hinge on face-frame or frameless cabinet runs where the design calls for partial overlay doors and a damped close. It suits cabinet shops building double-door base and wall cabinets, contractors specifying hardware for multi-room kitchens, and designers who want the quiet, controlled close of the Tiomos system at a half overlay position. The maximum door thickness of 24mm means it handles standard doors comfortably, including doors slightly above the typical 22mm range. For full overlay applications, a full-crank Tiomos variant is the right choice instead.

Common Questions

Quiet, Even Doors Across Every Double-Door Run

Specify this hinge when partial overlay doors need the controlled, damped close of the Tiomos system and a mounting method that works on any cabinet, with or without system holes.