Grass Tiomos Soft-Closing Hinge For Wide Doors

Grass Tiomos soft-closing hinge gives you a concealed cabinet hinge that combines a 155 degree opening angle with soft-close action for controlled door movement. This long arm European hinge is designed for full overlay applications, so the door covers the cabinet front while still opening to a wide angle for better access. As a concealed cabinet hinge in nickel finish, it keeps hardware out of sight, which helps maintain clean cabinet lines in both face frame and frameless builds. Being part of the Grass Tiomos self-closing hinge line means the hinge closes the door without extra catches, which streamlines hardware selection on a job. The hinge belongs to the European zero protrusion hinge category, so it supports cabinet layouts where interior pull-outs benefit from clear door swing.

Key Tiomos Hinge Details For Cabinet Projects

• The 155 degree opening angle gives wide access into the cabinet, which helps when cabinets hold pull-outs or when doors need to open beyond standard angles in tight layouts.
• The design for face frame or frameless cabinets lets one hinge style serve different construction methods, which helps standardize hardware across multiple projects and simplifies hinge planning.
• The ability to accommodate overlays up to 25.4 mm (1 inch) supports full overlay fronts, which is useful when aligning doors and drawer fronts in modern overlay cabinet runs.
• The 3-dimensional adjustment with a suitable base plate allows tuning in height, width, and depth, which helps dial in reveals and door alignment after doors are hung.
• The convenient depth adjustment with worm gear gives fine, repeatable front-to-back tuning, which helps correct minor carcass variances without removing the door or loosening multiple fasteners.
• The zero protrusion at a 90 degree open position keeps the door edge out of the cabinet interior, which supports installing interior roll-outs close to the opening without door interference.

Installation And Fit Details For This Hinge

The Grass concealed cabinet hinge uses a 10 mm cup depth, which fits standard hinge cup boring practices while leaving material in the door for strength. This Tiomos 155 degree hinge is intended for door thicknesses up to 32 mm (1-1/4 inch), so it supports thicker doors and applied fronts within that range. The hinge functions as a full overlay solution up to 25.4 mm (1 inch), which supports common overlay layouts on both face frame and frameless cabinets. Because the hinge uses 3-dimensional adjustment with the appropriate base plate, installers can adjust doors vertically, horizontally, and in depth on the job, which helps correct racking and out-of-square conditions. The self-closing soft-close function brings the door shut in a controlled way, which reduces slamming and helps protect cabinet fronts during everyday use.

Using This 155 Degree Hinge In Real Projects

Where This Tiomos Hinge Works Best

This Tiomos 155 degree soft-close hinge from Grass America fits jobs that need full overlay with more door travel than a standard hinge. Its ability to accommodate overlays up to 25.4 mm (1 inch) aligns well with overlay kitchen or bath runs where doors cover most of the frame. Because the hinge works on both face frame and frameless cabinets, it can be specified across different carcass constructions in the same space, such as built-ins and frameless casework. The zero protrusion at 90 degrees supports cabinets that use interior pull-outs or trays, since the open door will not swing into the hardware path when partially open. The 10 mm cup depth works with standard boring equipment, so shops can drill doors in a consistent pattern and keep boring setups simple. With suitability for door thicknesses up to 32 mm (1-1/4 inch), the hinge supports thicker decorative doors or applied panels within that thickness range. As a concealed cabinet hinge in the European zero protrusion hinge class, it is well suited to modern kitchens, closets, and commercial millwork where hidden hardware and clear interior access are priorities.

Adjustment And Fine Tuning For Repeatable Results

The Grass Tiomos soft-closing hinge offers 3-dimensional adjustment when paired with a suitable base plate, which lets installers move the door up and down, side to side, and in or out relative to the cabinet. This adjustment capability helps align reveals across a run of doors, keep gaps consistent, and resolve small cabinet out-of-square issues without reboring holes. The convenient depth adjustment with worm gear provides controlled front-to-back movement, so doors can be nudged closer to or farther from the cabinet face in small increments. That worm gear design supports repeatable fine tuning, which is important when multiple doors need to match plane across tall pantry or wardrobe installations. Because zero protrusion is maintained when the door is at 90 degrees, adjustments do not compromise interior clearance for pull-outs within the opening zone. The self-closing soft-close feature works together with precise alignment to bring doors closed smoothly onto the cabinet, which can reduce wear on edge banding and finishes over time. By combining a 155 degree opening angle, 3-dimensional adjustment, and soft-close operation, this hinge supports efficient installation and fine-tuned results in both shop-assembled and onsite-hung cabinets.

Common Questions About The Grass Tiomos Hinge

Selecting This Hinge For Your Next Cabinet Run

The Grass Tiomos soft-closing hinge, part number F028138561217, offers a 155 degree opening angle, full overlay support up to 25.4 mm, and 3-dimensional adjustment with a suitable base plate. That combination suits projects using face frame or frameless cabinets with thicker doors up to 32 mm. The zero protrusion characteristic at 90 degrees and 10 mm cup depth support modern cabinet layouts with interior pull-outs. For cabinet runs that need concealed hardware, wide access, and precise adjustment, this Tiomos hinge can streamline layout decisions and installation steps.