Grass Tiomos Self-Closing Hinges For Cabinet Doors

Grass Tiomos self-closing hinges are concealed cabinet hinges that deliver a 155 degree opening angle, so doors swing wide for access while staying hidden in use. The self-close function pulls the door shut at the end of travel, which helps doors stay consistently closed in everyday operation. These Tiomos hinges are designed for both face frame and frameless cabinets, allowing one hinge series to be used across different cabinet constructions on the same project. The hinge accommodates overlays up to 25.4 mm, or 1 inch, letting you build full overlay and heavy overlay layouts without changing hinge families. A minimal reveal is supported by this overlay and opening combination, which allows tight, clean door gaps in finished installations. The hinge design is part of the Grass concealed cabinet hinge line, so it suits projects that call for a concealed, European-style long arm hinge solution.

Key Tiomos Hinge Details That Help On Site

• The 155 degree opening angle allows wide-angle door swing, which gives better interior access when loading cabinets or working inside the case.
• Use on face frame or frameless cabinets to keep your hinge program consistent, which simplifies layout decisions across mixed cabinet constructions.
• Overlay capacity up to 25.4 mm, or 1 inch, supports full overlay fronts, which helps when aligning doors to flush cabinet sides on overlay designs.
• Zero protrusion at 90 degrees open means the door does not project into the cabinet opening at that angle, which aids in using interior roll-outs or drawers behind the door.
• The 10 mm cup depth suits doors drilled to that standard depth, which helps when matching existing boring setups or CNC programs in a cabinet shop.
• Support for door thicknesses up to 32 mm, or 1-1/4 inch, allows use on thicker door constructions, which is useful for heavier or profiled fronts.

Mounting And Adjustment For Precise Cabinet Alignment

This Grass concealed cabinet hinge uses a 3-dimensional adjustment mechanism, so you can adjust height, side-to-side, and depth to align the door to the cabinet. The adjustment works together with a suitable base plate, providing a complete adjustment range at the hinge arm and plate interface. A convenient depth adjustment with worm gear is built into the hinge, letting you shift the door in and out in small, repeatable increments for fine reveals. The hinge is designed for 10 mm cup depth drilling in the door, which supports accurate mounting when using standard European hinge boring patterns. With support for overlays up to 25.4 mm and door thicknesses up to 32 mm, the mounting geometry allows flexibility in fitting different door constructions on the same cabinet run.

Using This Zero Protrusion Hinge In Cabinet Projects

Where This Tiomos 155 Degree Hinge Performs Best

This Tiomos 155 degree hinge is suited to cabinets that need a wide door opening, because the 155 degree movement lets the door swing past a standard right angle. The design delivers zero protrusion when the door is opened to 90 degrees, so at that angle the door stays clear of the interior opening and does not intrude into the cabinet box. That behavior supports cases with interior roll-outs or drawers, since the door can sit fully open at 90 degrees while interior components move freely. The hinge can be installed on face frame cabinets, which are common in many shops, and on frameless cabinets, which are standard in many European-style builds. This dual application allows the same hinge series to serve different lines, simplifying hardware choices across projects.

Why Adjustment, Overlay, And Cup Details Matter

The 3-dimensional adjustment with a suitable base plate means this hinge can respond to small construction variances by moving the door in height, width, and depth, which supports tight reveals along cabinet banks. The worm gear depth adjustment allows controlled in-and-out door movement, helping you correct for out-of-plane boxes or door bow without reboring. Overlay capacity up to 25.4 mm, or 1 inch, gives room to design full overlay facings, which lets doors cover cabinet fronts generously for a modern look. Minimal reveal supported by this hinge geometry helps create even, narrow gaps between doors, important on multi-door runs. The 10 mm cup depth works with common boring practices in European concealed hinges, so CNC programs or jigs using that depth stay valid. Door thickness support up to 32 mm, or 1-1/4 inch, means thicker doors still fit within the hinge kinematics, which is useful when moving between standard and heavier fronts on the same job. The self-close action built into the hinge contributes to doors settling against the cabinet consistently, reinforcing the visual alignment achieved through the adjustment features.

Common Questions About This Tiomos Cabinet Hinge

Selecting This Tiomos Hinge For Your Cabinet Run

The Tiomos 155 degree cabinet hinge with self-close action, 3-dimensional adjustment, and zero protrusion at 90 degrees supports projects that blend face frame and frameless construction with overlay fronts. Its 10 mm cup depth, support for overlays up to 25.4 mm, and door thicknesses up to 32 mm give flexibility in door design while keeping adjustment control at the hinge. For cabinet runs needing a concealed hinge that combines wide opening with precise alignment, this Grass Tiomos self-closing hinge offers a consistent, European-style hardware choice.