Grass Tiomos Impresso Soft-Close Half Overlay Face-Frame;Frameless Hinges Nickel, 120° Toolless - F017139430228
Description
Grass Tiomos Soft-Close Hinge For Cabinet Doors
Grass Tiomos soft-close hinge is a concealed cabinet hinge designed for both face frame and frameless cabinets, so it supports a wide range of cabinet builds in one platform. The 120 degree opening angle provides a broad swing for standard doors and wide-angle doors, which helps doors clear cabinet edges and nearby fronts. This hinge is a soft-closing model, so it controls the door as it closes and reduces slamming in everyday use. It is a half overlay design, so it is suited for layouts where two doors share a face frame or where reduced overlay is required. The hinge belongs to the Tiomos series from Grass America, so it matches the Tiomos system geometry on suitable base plates. The hinge is finished in nickel, so it presents a neutral, professional appearance that works with most cabinet interiors.
Key Tiomos Hinge Details That Support Work
- This Grass Tiomos hinge is a European concealed long arm hinge, so it installs inside the cabinet and leaves the exterior clean while preserving full door articulation.
- The hinge is classified as a concealed cabinet hinge, so it is built for hidden mounting in cabinet applications where visible hardware would disrupt the design.
- Tiomos soft-closing hinges are described as offering unmatched performance in a timeless design, so they are intended for demanding cabinet projects where smooth motion and consistent operation are priorities.
- The 120 degree hinge opening is specified for a wide range of applications, so it handles both standard door swings and layouts requiring a wider access angle.
- This hinge is specified as a half overlay type, so it suits cabinet fronts where the door does not fully cover the face frame or side panel and precise overlay control is needed.
Installation And Tool-Less Mounting Characteristics
The Tiomos 120 degree hinge is listed as toolless, so it is configured for mounting and removal from a suitable base plate without separate tools during that step of the workflow. The hinge uses a 3-dimensional adjustment mechanism when paired with a suitable base plate, so height, width, and depth can be tuned to align doors within a run. Convenient depth adjustment with a worm gear is specified, so installers can dial the in-and-out position of the door in small, repeatable increments. The hinge accommodates overlays up to 24 mm, or 15/16 inch, so it covers common overlay ranges found in cabinet construction. It is also noted for an optimal reveal with door thickness up to 24 mm, so the geometry supports typical door sections without compromising clearance.
Using This Soft-Close Hinge In Cabinet Projects
Where This Grass Concealed Hinge Is Applied
This Grass Tiomos Impresso soft-close half overlay hinge is designed for both face frame and frameless cabinets, so a single hinge style can serve multiple construction methods in a shop or on site. Because it is a concealed European hinge in the Tiomos family, it suits modern cabinet lines where hidden hardware and smooth motion are expected. The 120 degree opening angle allows the hinge to work on standard doors and also on wide-angle layouts, so access to cabinet interiors is improved over more limited hinges. Its ability to accommodate overlays up to 24 mm and maintain an optimal reveal with door thickness up to 24 mm means it fits many common cabinet door and frame combinations used in residential and commercial work.
How Tiomos Adjustment And Soft-Close Improve Results
The Tiomos hinge features 3-dimensional adjustment with a suitable base plate, so installers can fine-tune height, side-to-side position, and depth until door gaps and reveals are consistent across the run. This level of control supports clean sightlines and reduces callbacks caused by misaligned doors. Convenient depth adjustment with a worm gear gives a precise, gear-driven way to move the door closer to or farther from the cabinet, so small corrections can be made without loosening and retightening mounting points. As a soft-close hinge, it gently controls the door during closing, so impacts at the cabinet front are reduced and doors settle against the frame more quietly. Being part of the Tiomos range from Grass America, this hinge aligns with Tiomos system dimensions, so shops standardized on Tiomos geometry can integrate this 120 degree half overlay option into existing layouts.
Common Questions About This Tiomos Cabinet Hinge
What type of cabinet construction does this hinge support?
This Grass Tiomos soft-close hinge is specified for both face frame and frameless cabinets, so it can be used across different construction methods in the same project.
How far does the Tiomos hinge allow the door to open?
The Tiomos 120 degree hinge provides a 120 degree opening angle, so doors can swing wide enough for better interior access on standard and wide-angle applications.
What overlay range is this half overlay hinge designed for?
This soft-closing half overlay hinge accommodates overlays up to 24 mm, or 15/16 inch, so it fits common reduced-overlay door layouts.
How does the 3-dimensional adjustment help during installation?
The Tiomos hinge offers 3-dimensional adjustment with a suitable base plate, so height, side offset, and depth can be tuned to create consistent reveals.
What is the benefit of worm gear depth adjustment?
The Tiomos worm gear depth adjustment provides a controlled, incremental way to move the door in or out, so installers can refine alignment without loosening the hinge.
Who manufactures this soft-closing cabinet hinge?
This 120 degree soft-close hinge is part of the Tiomos series from Grass America, so it matches Grass Tiomos system design and motion characteristics.
Selecting This Tiomos Hinge For Your Next Run
This Grass Tiomos soft-close half overlay face-frame;frameless hinge brings 120 degree opening, 3-dimensional adjustment with suitable base plates, and worm gear depth control together in one concealed hinge. For shops and installers working across face frame and frameless lines, its ability to accommodate overlays up to 24 mm and support door thickness up to 24 mm helps standardize hardware selection. Choosing this Tiomos hinge lets projects use the same concealed nickel-finished platform wherever a 120 degree soft-closing half overlay hinge is specified.
