Nickel Thick Door Hinge for Half Overlay Doors Up to 36mm

This Grass Tiomos concealed hinge is built specifically for thick doors up to 36mm, delivering soft-close performance at a 95 degree opening angle for half overlay applications on face-frame and frameless cabinets. It mounts with dowels for a screw-free cup attachment, and it is the Tiomos platform's answer to heavier, thicker door construction.

Key Features

• Designed for thick doors up to 36mm, with cup geometry matched to heavier door stock where a standard hinge would not seat correctly.
• Integrated soft-close damps the door over the final closing arc so it settles quietly without impact.
• 95 degree opening angle is the engineered swing that lets a thick door clear the cabinet front without binding.
• Half overlay, half crank arm positions the door to cover part of the cabinet side, the geometry for two doors sharing a center partition.
• Dowel mount presses the cup into pre-bored dowel holes in the door face with no cup screws required.
• Three-way adjustment of plus or minus 3mm in height, side, and depth brings doors to an even reveal after installation.

Built for Thick Stock That a Standard Hinge Cannot Handle

When a door is thicker than the standard 16 to 22mm window, a conventional concealed hinge runs out of cup depth and arm geometry. This Tiomos thick door hinge is purpose-built for stock up to 36mm, with a 35mm cup that bores into the door at a depth calibrated for heavier material. The 95 degree opening angle is not a restriction here; it is the correct geometry that lets a thick door swing clear of the cabinet face without collision. For standard-thickness doors, a wider-angle hinge is the better fit. For doors in the 23 to 36mm range, this is the one.

The cup mounts via dowels, pressing into bored holes for a clean, screw-free attachment on the door side. A matching Grass base plate mounts to the cabinet and the arm connects to it. That plate is sold separately and should be a Grass plate matched to this series; plates are brand and series specific and a plate from another manufacturer will not connect to this hinge.

Tiomos Build Quality in a Nickel Finish

The hinge body is steel with a nickel finish, consistent with the Tiomos platform's construction standard. Soft-close is integrated directly into the hinge rather than added on, so the damping is part of the mechanism and does not require a separate adapter. The three-way adjustment range handles settling and minor alignment shifts without removing the door: a turn of the cam brings height, side position, and depth back into square.

Where This Hinge Belongs

This is the hinge to specify when a project calls for thick-panel doors on either face-frame or frameless cabinets and the design pairs doors on a shared center partition at a half overlay. It suits cabinet shops routing CNC production lines where dowel attachment fits the boring sequence, and contractors fitting custom or semi-custom work with substantial door stock. If the doors on the same run are standard thickness, use the standard Tiomos in the matching overlay and closing configuration. If soft-close is not needed, there is a self-close version of this thick door hinge as well.

Common Questions

Thick Doors, Even Reveals, Quiet Close

Specify this hinge when the job calls for soft-close performance on thick-panel half overlay doors, with the reliable geometry of the Tiomos platform and a finish that coordinates with nickel pulls and hardware across the cabinet run.