Nexis 170 Degree Hinge For Wide Access

Nexis 170 degree hinge from Grass America is a concealed cabinet hinge designed to deliver a wide 170 degree opening angle, which lets doors swing well out of the way so you can access corner storage and deep interiors more easily. This Grass Nexis self-close full overlay hinge is part of the Nexis 170 degree hinge family, so it stays hidden inside the cabinet for a clean exterior while still giving generous access where a standard opening angle is limiting. As a concealed cabinet hinge in a nickel finish, it supports modern casework where appearance and smooth operation both matter. The hinge is commonly used in corner or lazy susan applications, tying directly to projects where rotating shelves and intersecting doors need extra clearance. With its full overlay design for face-frame and frameless cabinets, it allows the door to cover the cabinet front, which helps align with surrounding fronts for a consistent look.

Key Nexis 170 Degree Hinge Work Advantages

• The 170 degree opening angle lets the door swing far past standard openings, which matters when installers need unobstructed access to corner or lazy susan cabinets during fitting and later use.
• The hinge provides zero protrusion when opened at 90 degrees, so the door does not project into the cabinet interior, which helps shelves and pull-outs move freely without interference at that position.
• The self-close function helps pull the door shut at the end of travel, which simplifies alignment for the user and reduces the chance of doors being left slightly open in everyday operation.
• The 3-dimensional adjustment for side, depth, and height allows fine-tuning of gaps and reveals after installation, helping installers dial in consistent lines across multiple doors without reboring or remounting.
• The hinge is commonly used in corner or lazy susan applications along with a pie cut hinge, which connects directly to situations where two doors share rotating shelves and must clear one another smoothly.

Installation And Screw-On Mounting Details

This Nexis screw-on cabinet hinge uses a screw-on cup fastening design with #6 x 5/8 inch screws, so it fastens directly into the door using standard drilling and driving steps familiar to cabinet shops. The hinge cup depth of 11 mm establishes the required bore depth in the door, which guides boring machine setup and helps prevent break-through on thinner fronts. A hinge cup edge drilling distance range of 3 mm to 10 mm gives flexibility for boring location, allowing installers to match existing shop standards or align with different overlay needs. Cup boring patterns of 42 mm and 45 mm mean the hinge works with common European hinge drilling patterns, supporting efficient production runs where line boring equipment is already set to those centers. The single screw side-to-side adjustment range of plus 1 mm to minus 3 mm provides lateral travel, so face gaps can be tightened or opened slightly without moving the mounting positions.

Using Grass Nexis Hinges In Real Projects

Where This Nexis 170 Degree Hinge Performs

Grass Nexis 170 degree hinges are commonly used in corner or lazy susan applications along with a pie cut hinge, so they directly support cabinets where rotating shelves meet hinged doors at challenging angles. Zero protrusion when opened at 90 degrees means the door stays flush with the cabinet side at that point, which is valuable when shelves or organizers need to move past the door edge during use. The full overlay application for face-frame and frameless cabinets lets the door cover the front, which helps align corners and intersections with adjacent doors in kitchen runs. Because this hinge is part of the concealed cabinet hinges class, it keeps hardware out of sight when the door is closed, which supports contemporary designs where visible hinges would interrupt flat or slab fronts. The nickel finish on the hinge contributes to a professional interior appearance, which matters when cabinets are left open frequently in active kitchens or shops.

Details That Support Adjustment And Repeatability

The 3-dimensional adjustment capability for side, depth, and height allows installers to correct for small drilling or mounting variances at the hinge, which reduces the need to re-machine doors or cases when gaps are slightly off. Single screw side-to-side adjustment of plus 1 mm to minus 3 mm gives precise lateral control, so reveals at stiles and between paired doors can be evened out across a run. The hinge cup edge drilling distance of 3 mm to 10 mm offers a broad setup window, letting the same hinge adapt to different overlays or design standards by simply changing the boring offset. Cup depth of 11 mm provides a defined boring target that works with many standard door thicknesses, which simplifies machine setup for repeat runs of similar fronts. Boring patterns of 42 mm and 45 mm allow the Grass Nexis self-close hinge to align with widely used European drilling layouts, helping maintain consistency when swapping hinges in an established production environment. Screw-on fastening with #6 x 5/8 inch screws means the hinge can be adjusted or replaced using everyday drivers, which keeps service visits and on-site tweaks straightforward.

Common Questions About Grass Nexis 170 Degree Hinge

Selecting This Nexis Hinge For Your Cabinets

The Grass Nexis 170 degree full overlay screw-on hinge F015072951217 pairs a wide 170 degree opening with self-close action, so it supports corner and lazy susan cabinets that demand both reach and clean closure. Its 3-dimensional adjustment for side, depth, and height, combined with single screw lateral tuning and 11 mm cup depth, gives shops and installers practical control over reveals across face-frame and frameless layouts. With zero protrusion at 90 degrees and support for 42 mm and 45 mm boring patterns, this concealed cabinet hinge fits smoothly into established drilling programs while keeping interiors functional. Use this Nexis screw-on cabinet hinge when a concealed, full overlay solution with generous swing and precise adjustment aligns with your cabinet design.