Grass Nexis 170 Degree Hinge For Wide Access

Grass Nexis 170 degree hinge gives cabinets a very wide opening angle, which helps when access over standard hinges feels tight. As a concealed cabinet hinge, it keeps the hardware hidden, supporting a clean cabinet exterior while handling frequent door movement on working jobsites and in busy kitchens.

This hinge is part of the Grass Nexis 170 degree family, so its geometry is suited to applications where doors need to swing well past 90 degrees. The self-close function pulls the door shut at the end of travel, which helps doors return consistently to the same closed position without manual nudging every time.

The hinge is a full overlay design for face-frame or frameless cabinets, so the door can cover most of the front, which is useful when aligning doors across a run. It is commonly used in corner or lazy susan applications, along with a pie cut hinge, where very wide opening and overlay coverage are important to clear adjacent doors and frames.

Key Nexis 170 Degree Hinge Working Advantages

• The hinge provides a 170 degree opening, giving wide access into the cabinet, which is particularly useful on corner and lazy susan layouts where deeper reach is required.
• Zero protrusion when opened at 90 degrees keeps the door from projecting into the cabinet opening, which helps with tight minimum gaps and reveals and allows adjacent pull-outs or shelves to move without interference.
• A 3-dimensional adjustment feature allows fine-tuning of side, depth, and height, which speeds up door alignment and reduces the time spent chasing small reveal issues across multiple doors.
• Single screw side-to-side adjustment from plus 1 mm to minus 3 mm gives a controlled lateral shift, which helps correct uneven gaps between doors or between door and frame after mounting.
• The hinge cup has an 11 mm depth, so drilling depth is clearly defined, helping drilling setups stay consistent across doors and reducing mistakes during door prep.
• A hinge cup edge drilling distance range of 3 mm to 10 mm provides flexibility in cup location, which helps match existing boring patterns or layout preferences on different cabinet lines.

Installation And Boring Details For Nexis Hinge

The Nexis 170 degree hinge uses dowel cup fastening in this version, which suits production methods that rely on bored and pressed cups for repeatable placement, reducing layout time per door. It also fits cabinet doors with boring patterns of 42 mm and 45 mm, which matches common European drilling standards and helps when retrofitting or coordinating with existing boring machinery.

Screw-on and doweled Nexis hinges use a stamped steel cup, which provides a familiar drilling and seating feel for installers used to traditional steel cups and supports firm seating in the 11 mm recess. Tool-less Impresso Nexis versions use a die-cast steel cup and closing flap with all metal construction, giving another fastening style within the same Nexis 170 degree family for shops that prefer press-in tool-less mounting while keeping metal-to-metal engagement at the door.

Using Nexis 170 Degree Hinge In Real Cabinets

Where This Grass Nexis 170 Degree Hinge Fits Best

This hinge is commonly used in corner or lazy susan applications along with a pie cut hinge, so its 170 degree opening angle directly supports the wide swing needed for internal trays and turntables. Zero protrusion at 90 degrees allows the door to open without crossing the cabinet interior line at that angle, which is valuable around intersecting cabinets and appliances where internal components must clear the opening.

As a full overlay hinge for face-frame or frameless cabinets, it allows the door to cover the cabinet front so visible framing is minimized, supporting a continuous front across adjoining doors. The hinge cup drilling distance range of 3 mm to 10 mm helps fit different door edge conditions and construction styles, whether the shop favors tighter or looser edge distances. Because the same Nexis 170 degree concept is used across different cup fastening designs, installers can select dowel, screw-on, or Impresso versions that match their shop tooling strategy while maintaining similar opening behavior on the finished cabinet run.

Adjustment And Details That Support Clean Results

The 3-dimensional adjustment on the Nexis 170 degree hinge lets installers refine side, depth, and height positions after mounting, which reduces re-drilling and enables on-site tuning when cabinets are already hung. The single screw side-to-side adjustment from plus 1 mm to minus 3 mm gives a predictable lateral shift, helping close up a gap on the hinge side or open a joint between doors to keep reveals consistent.

The 11 mm cup depth clearly defines the bore, which stabilizes the hinge seating and helps automated or manual boring setups stay repeatable, especially across large door batches. Boring patterns of 42 mm and 45 mm align with common line-boring jigs and machinery, so shops can keep existing drilling equipment and still run this hinge. Zero protrusion at 90 degrees combines with the full 170 degree opening to keep doors out of the interior space through the swing range, which benefits cabinets with pull-out storage or rotating trays that pass close to the hinge line.

Common Grass Nexis 170 Degree Hinge Questions

Choose Nexis 170 Degree Hinge For Corner Access

The Grass Nexis 170 degree hinge with full overlay function and dowel fastening offers wide-door swing, concealed hardware, and 3-dimensional adjustment that work well on demanding cabinet runs. Its zero protrusion at 90 degrees and 11 mm cup depth translate directly into cleaner reveals and smoother movement around pull-outs and lazy susan trays. For cabinets built around 42 mm or 45 mm boring patterns and full overlay layouts, this Nexis 170 degree hinge provides a practical way to reach wide opening angles while keeping doors aligned.