Grass Nexis 170 Degree Hinge For Wide Access

Grass Nexis 170 degree hinge gives a concealed cabinet hinge solution that opens to 170 degrees, allowing doors to swing well clear of the opening so interior space is easier to reach in everyday cabinet work. As a self-close full overlay hinge for face-frame and frameless cabinets, it pulls the door shut at the end of travel, helping doors seat consistently against the case. The hinge is part of the Grass Nexis Impresso family, so it matches projects that are already using this system on other openings. As a concealed cabinet hinge, it hides inside the cabinet, keeping the exterior line clean while still giving full function for access and adjustment. The hinge sits in an 11 mm cup depth in the door, which preserves door strength while still providing room for the long arm mechanics. With a 170 degree opening angle, corner layouts and adjacent fronts stay more workable.

Key Nexis Impresso Details That Support Cabinet Builds

• The 3-dimensional adjustment lets you fine-tune side, depth, and height, so doors align across a run of cabinets and reveals stay consistent after installation or small case shifts.
• A 170 degree opening angle works well for corner and lazy susan applications, so doors clear the opening and interior hardware with less interference in day-to-day use.
• Zero protrusion at 90 degrees keeps the open door from projecting into the cabinet opening, which helps when aligning adjacent fronts and planning tight corner conditions.
• The hinge cup depth of 11 mm provides a standard boring depth that fits typical cabinet door construction while still leaving material behind the cup for screw holding strength.
• A hinge cup edge drilling distance of 3 mm to 10 mm gives flexibility in boring layout, so you can match different overlay and reveal requirements across projects.
• Single screw side-to-side adjustment of plus 1 mm to minus 3 mm allows quick fine-tuning of the gap between doors without removing the door from the cabinet.

Mounting, Boring, And Toolless Cup Connection Details

This Nexis Impresso toolless hinge uses a toolless Impresso cup fastening design, so the die-cast steel cup locks into the bored hole without separate screw driving at the cup, speeding repetitive door preparation. The hinge supports boring patterns of 42 mm and 45 mm, letting you work with common European boring jigs and CNC programs on different shops or machines. With a hinge cup edge drilling distance from 3 mm to 10 mm, you can shift the cup position for different overlays while still using the same hinge model. The zero protrusion behavior at 90 degrees means that with the door open to a right angle, the hinge arm does not project into the cabinet opening, which matters when doors sit near interior roll-outs or pie cut hinge hardware.

Where This Concealed Hinge Fits In Cabinet Work

Corner And Lazy Susan Cabinet Applications

Grass Nexis 170 degree hinge is commonly used in corner or lazy susan cabinet applications, so it suits layouts where doors must swing wide to expose rotating shelves or interior fittings. When used with a pie cut hinge, the 170 degree opening lets the primary door move far enough out of the way so the connected pie cut door can articulate through its range. Zero protrusion at 90 degrees helps doors clear adjacent fronts and interior turntables because the hinge parts stay inside the cabinet envelope as the door opens. The full overlay design lets the door cover the front of the cabinet face-frame or frameless edge, supporting modern lines while still pairing with corner hardware. In installations with restrictive clips for lipped doors or mitered corners, the same Nexis 170 degree platform can be tuned for special situations.

Adjustment And Construction That Support Repeatable Results

The hinge offers 3-dimensional adjustment in side, depth, and height, which lets installers dial in consistent reveals around doors even when cabinet boxes vary slightly. Single screw side-to-side adjustment of plus 1 mm to minus 3 mm means a small turn on one fastener shifts the door gap, saving time over remounting. Depth and height adjustment work with the same mechanism group, so once the cup is locked in, fine-tuning happens at the hinge arm instead of the door. Tool-less Impresso cup fastening uses a die-cast steel cup and closing flap with all metal construction, giving a solid connection between hinge and door that remains stable over repeated openings. The die-cast cup design separates this version from the stamped steel cups on screw-on and doweled Nexis hinges, aligning it with jobs that favor an all metal cup structure in the door.

Common Grass Nexis 170 Degree Hinge Questions

Choose This Nexis Hinge For Corner Access

Grass Nexis 170 degree hinge with self-close full overlay action delivers a concealed hinge choice that supports corner cabinets, lazy susan layouts, and wide opening doors. With 3-dimensional adjustment and toolless Impresso cup fastening, it fits production work or detailed one-off builds where precise reveals and clean access are important. Use the specified 11 mm cup depth, 3 mm to 10 mm edge drilling range, and 42 mm or 45 mm boring patterns to align this hinge with your drilling setup, then apply the side, depth, and height adjustments to bring doors into final position.