Grass Nexis Impresso Self-Close Full Overlay Face-Frame;Frameless Hinges Nickel, 125° Toolless - F014072524225
Description
Grass Nexis 125 Degree Hinge For Full Overlay
Grass Nexis 125 degree hinge is a concealed cabinet hinge from Grass America designed as a self-closing solution for full overlay face-frame or frameless cabinets. As a concealed cabinet hinge, it keeps the hardware out of sight while controlling the door swing, which helps create a clean, professional cabinet appearance on finished installations. The Nexis 125 degree opening angle lets the door swing past standard right-angle access, which helps when loading wider items or working inside the cabinet during fitting and adjustment. This hinge belongs to the Nexis Impresso family, identified by manufacturer part number F014072524225, so it fits into projects that standardize on Nexis hardware. As a self-closing hinge, it brings the cabinet door into the closed position at the end of travel, which supports consistent alignment of door gaps under everyday use.
Key Nexis Impresso Details That Support Your Build
- The 3-dimensional adjustment on Nexis 125 degree hinges covers side, depth, and height, so the door position can be fine-tuned after mounting, which helps dial in even reveals and correct minor drilling or cabinet construction variation on site.
- The single screw side-to-side adjustment range of plus 1 mm to minus 3 mm provides lateral movement at the hinge, which lets an installer shift the door enough to align it with neighboring fronts without redrilling hinge cups or cabinet mounting positions.
- Cup depths of 11.8 mm for Nexis and 12 mm for Nexis Impresso match common 35 mm cup boring operations, which allows standard drilling equipment and patterns to be used while still giving proper seating depth and secure support for typical cabinet doors.
- The hinge cup edge drilling distance of 3 mm to 6 mm gives flexibility for cup setback on the door, which allows the same hinge series to adapt to different overlay and profile situations while keeping the hinge mechanics working in their designed range.
- Boring patterns of 42 mm and 45 mm match common European-style drill jigs, which simplifies layout for production shops and leads to repeatable hinge positioning between cabinets, even when switching between face-frame and frameless construction.
Mounting And Toolless Cup Design For Nexis Impresso
Nexis hinges are designed to work with the Grass mounting plates, so the hinge arm interfaces directly with a coordinated plate system, which supports consistent mounting geometry across a run of cabinets. Grass Nexis 125 degree hinges are available in three cup fastening designs described as screw-on, doweled, and toolless Impresso, so a shop can choose a fastening style that matches its drilling capabilities and production flow. The Tool-less Impresso variant uses a toolless attachment method at the cup, which speeds mounting on prepared doors because engagement happens without separate fastening steps at the cup location.
Where Nexis Impresso Hinges Fit And Why Details Matter
Nexis Full Overlay Use In Cabinet Projects
The Nexis Impresso self-close full overlay configuration is intended for applications where the cabinet door overlays the face-frame or side panel, so it supports modern full-overlay layouts without exposed hinge hardware. Being part of the Nexis 125 degree hinge family used on both face-frame and frameless cabinets, this hinge lets a shop carry a consistent look across mixed cabinet construction, which simplifies hardware planning for larger projects. Nexis hinges are compatible with the soft-close devices, so a builder using Nexis hardware can integrate a separate soft-close device into the same hinge system when a project calls for controlled, damped closing behavior. The self-closing function built into these hinges pulls the door shut at the end of travel, which helps maintain consistent closed alignment of multiple doors along a run and reduces the tendency for doors to rest slightly ajar after use.
Construction, Cup Depth, And Adjustment For Alignment
Tool-less Impresso hinges feature a die-cast steel cup and closing flap with all metal construction, which provides a rigid hinge cup structure that supports the door load and contributes to long-term stability of the hinge-to-door connection. Screw-on and doweled Nexis hinges feature a stamped steel cup, so across the Nexis line the cup is always steel, which supports strength around the 35 mm bore and resists deformation under repeated door cycles. The specified cup depths of 11.8 mm for Nexis and 12 mm for Nexis Impresso are tuned to typical 19 mm or 3/4 inch door thickness, so the hinge mechanics sit correctly in the door without breaking through the front face, preserving both appearance and structural integrity. Three-dimensional adjustment across side, depth, and height allows an installer to correct for small variances in cabinet box squareness or drilling location, which reduces rework because fine-tuning is done at the hinge instead of altering the cabinet or door. The single screw side-to-side adjustment of plus 1 mm to minus 3 mm gives enough lateral travel to straighten joint lines between doors, which is especially useful on longer cabinet runs where minor cumulative variances show up as inconsistent gaps. Boring patterns offered at 42 mm and 45 mm let a shop standardize on a preferred system drill pattern yet still use the same Nexis 125 degree concealed cabinet hinge, which keeps hinge choice consistent while serving different production standards.
Common Nexis Impresso 125 Degree Hinge Questions
What type of hinge is the Grass Nexis 125 degree hinge?
Grass Nexis 125 degree hinge is a concealed cabinet hinge in the Nexis Impresso self-close full overlay family, so it hides the mechanism while controlling door swing and closing on face-frame or frameless cabinets.
How far does the Nexis 125 degree hinge allow the door to open?
Grass Nexis 125 degree hinge provides a 125 degree opening angle, which lets the door swing past 90 degrees for better interior access and easier work inside the cabinet.
How does the 3 dimensional hinge adjustment help during install?
The 3 dimensional hinge adjustment on Nexis 125 degree hinges lets side, depth, and height be tuned, which helps align reveals and compensate for small cabinet or drilling variances after mounting.
What side to side adjustment range does this hinge provide?
The Nexis 125 degree hinge offers single screw side-to-side adjustment from plus 1 mm to minus 3 mm, giving lateral movement to align doors with neighboring fronts without altering cup bores.
Which door thickness is this Nexis hinge designed to support?
Nexis 125 degree hinges are designed for door thickness up to 19 mm or 3/4 inch, which fits common cabinet door construction in many shop and site-built projects.
What drilling patterns work with the Nexis Impresso hinge cup?
The Nexis Impresso hinge cup works with 42 mm and 45 mm boring patterns, so it matches widely used European hinge drilling jigs in cabinet production.
Selecting This Nexis Hinge For Your Cabinet Run
Nexis Impresso toolless hinge in the 125 degree self-close full overlay version ties together Nexis geometry, 3-dimensional hinge adjustment, and compatibility with Grass mounting plates, so it fits cabinet runs that need concealed hardware, extended door opening, and precise on-hinge alignment. Grass Nexis 125 degree hinge with its specified cup depth and door thickness range fits standard 19 mm or 3/4 inch doors, which keeps drilling and layout straightforward for both production shops and serious DIY installers. Choose this concealed cabinet hinge when a project is already built around Nexis hinges or needs the Nexis interface to work with soft-close devices and Grass mounting plates across a consistent hardware system.
