Grass Nexis 125 Degree Hinge For Cabinet Doors

Grass Nexis 125 degree hinge gives a concealed cabinet hinge solution that suits full overlay cabinet doors, so the hinge stays hidden while the door covers the face frame or panel. The self-closing function pulls the door shut at the end of travel, which helps doors sit in the closed position without added catches. This Nexis hinge belongs to the concealed cabinet hinges class, so it mounts inside the cabinet and on the back of the door for a clean exterior. The nickel finish on the hinge creates a neutral look inside the cabinet, which works well alongside typical cabinet hardware. Nexis 125 degree opening allows the door to swing wider than many standard hinges, which improves interior access on full overlay applications. The hinge design suits door thickness up to 19 mm, or 3/4 inch, which matches common cabinet door construction.

Key Nexis Hinge Details That Support Your Work

• The 3-dimensional adjustment on this Nexis hinge lets you change side, depth, and height, which supports precise door alignment after installation when framing or door conditions vary.
• Single screw side-to-side adjustment from plus 1 mm to minus 3 mm allows quick fine tuning of reveals, which saves time when matching gaps across multiple doors on a run.
• Cup depths of 11.8 mm for Nexis and 12 mm for Nexis Impresso give defined boring depths, which helps drilling setups stay consistent across doors and reduces rework from mis-bored cups.
• The hinge cup edge drilling distance range of 3 mm to 6 mm offers flexibility in cup location, which helps adapt to different overlay requirements and construction styles while keeping the same hinge type.
• Boring patterns of 42 mm and 45 mm mean the hinge fits two common cup hole spacing layouts, which simplifies using existing drilling jigs or CNC programs in the shop.

Nexis Hinge Mounting, Cup Design, And Fastening

This Nexis 125 degree hinge is available in screw-on, doweled, and tool-less Impresso cup fastening designs, which lets you match the hinge to your preferred production or installation method. Screw-on and doweled versions use a stamped steel cup, which provides a formed steel interface for the door. Tool-less Impresso versions use a die-cast steel cup and closing flap with all metal construction, which creates a solid mechanical connection to the cabinet door without separate tools. The dowel fastening option offers press-in style location, which suits line-bored doors in higher volume cabinet work. The hinge design fits both face-frame and frameless applications in a full overlay configuration, which supports consistent hardware across different cabinet construction styles.

Using Nexis 125 Degree Hinges In Real Projects

Where This Nexis Self Close Full Overlay Hinge Fits

This Grass America Nexis hinge works on cabinet doors up to 19 mm thick, which aligns with typical 3/4 inch face-frame and frameless cabinetry. The 125 degree opening angle gives wider access than basic hinges, which helps on full overlay doors near interior drawers or roll-outs. Nexis hinges fall under European concealed long arm hinges, which means they sit on a cup bored into the door and a mounting connection inside the cabinet. The full overlay design means the door covers the face frame or cabinet side, which is common in modern kitchen and bath layouts. Nexis hinges are compatible with soft-close devices, which allows you to add damped closing performance while keeping the same core hinge layout. The nickel hinge finish suits interior cabinet environments, which keeps the hardware visually consistent with other nickel cabinet fittings.

Adjustment And Details That Improve Door Alignment

The 3-dimensional adjustment of this Nexis concealed cabinet hinge lets you correct side, depth, and height positions, which helps align doors when cabinet openings are slightly out of square. The single screw side-to-side adjustment with a range of plus 1 mm to minus 3 mm allows small reveal changes, which is valuable when matching gaps across several doors on a shared face frame or panel. Defined cup depths of 11.8 mm on Nexis and 12 mm on Nexis Impresso provide clear boring targets, which supports repeatable machining on drills or CNC equipment. Cup edge drilling distances from 3 mm to 6 mm allow small shifts in cup placement, which helps match overlays or clear interior components while staying within the hinge design limits. Boring patterns of 42 mm and 45 mm give flexibility in cup spacing, which makes it easier to use existing boring jigs from different systems without changing the hinge family.

Common Questions About The Nexis 125 Degree Hinge

Select The Nexis Hinge For Full Overlay Jobs

The Grass Nexis 125 degree hinge with self-closing action and full overlay design supports both face-frame and frameless cabinet layouts, so a single hinge family can serve varied projects. The 3-dimensional adjustment and defined boring dimensions help align doors cleanly across a run, which reduces time spent dialing in reveals. Boring patterns of 42 mm and 45 mm and a door thickness rating up to 19 mm connect directly to common shop standards, which streamlines drilling and layout. For full overlay cabinet doors that need concealed hardware and precise adjustment, this Nexis hinge configuration offers a focused solution.