Grass Nexis 95 Degree Hinge For Thick Doors

Grass Nexis 95 degree hinge defines a concealed cabinet hinge solution for profile and large overlay doors where a 95 degree opening angle is required. As a European concealed long arm hinge, it keeps hardware out of sight while providing the motion needed on frameless cabinets. The self-close function uses a special spring mechanism, which delivers strong closing force that supports heavy or large doors moving back to the cabinet reliably. A stamped steel arm paired with a die-cast steel hinge cup in a bright nickel finish creates a robust hinge construction that stands up to repeated use while presenting a clean, uniform appearance inside the cabinet. This Nexis hinge is part of the Grass America line of concealed cabinet hinges, giving installers a recognizable option in the European thick door hinges category for demanding cabinet projects.

Key Nexis Hinge Details That Support Jobs

• The Nexis self-close function uses a special spring mechanism, which increases closing force so heavy or large doors pull in firmly and stay against the cabinet face in everyday use.
• Three-dimensional adjustment for side, depth, and height allows precise door positioning, which reduces door misalignment on frameless cabinets and helps speed final installation tuning.
• The hinge design supports door thickness up to 36 mm, so thicker profile doors can be used while still maintaining proper function and gap control on the cabinet run.
• Overlays up to 23 mm are supported, which enables large overlay applications on frameless cabinets while maintaining the concealed hinge layout and appearance.
• Minimal gap dimensions on thick doors are supported by the Nexis geometry, which helps create tight, consistent reveals that are valued on higher-end cabinet projects.
• An excellent weight capacity is built into the stamped steel arm and die-cast cup construction, which supports heavy doors so they stay aligned over time under regular operation.

Door Boring And Screw-On Mounting Details

The Nexis 95 degree hinge uses a screw-on cup fastening design, giving installers a familiar mounting workflow with standard drilling equipment. A cup depth of 13.2 mm defines the hinge cup bore, guiding drill bit setup for consistent seating in the door. The hinge cup edge drilling distance range from 3 mm to 10 mm provides flexibility in cup location, which helps align overlays and reveals across different door constructions. A boring pattern of 40 mm locks in the cup hole spacing, supporting repeatable drilling on production or shop jigs. Two #6 x 5/8 inch screws are specified for the screw-on configuration at the cup, tying the hinge securely into the prepared bore while keeping the installation straightforward.

Using The Grass Nexis Hinge On Real Projects

Where This Nexis Full Overlay Hinge Fits Best

This Nexis full overlay frameless hinge is designed for profile doors and large overlay doors on frameless cabinets, aligning with applications where overlay up to 23 mm is required. Door thickness capability up to 36 mm supports thick door construction, which is common with profiled or heavy panel designs. Minimal gap dimensions on thick doors help maintain tight reveals around adjacent fronts, supporting clean runs on European-style installations. As a concealed cabinet hinge, it suits projects where the hardware must remain hidden on the closed door, improving the interior look of kitchen, bath, or casework cabinets. The hinge is designed to work with Grass mounting plates, tying it into an established mounting plate system for frameless cabinet layouts. Nexis hinges are also compatible with Grass soft-close devices illustrated, so soft-close functionality can be added using the matching Grass solution where that closing action is desired on the same hinge family.

Adjustment, Geometry, And Consistent Alignment Results

The three-dimensional adjustment capability of the Nexis hinge covers side, depth, and height, giving installers fine control over door alignment after mounting. A single screw side-to-side adjustment of plus 1 mm to minus 3 mm allows quick lateral shift, which corrects small reveal differences between doors without redrilling. Depth adjustment in the hinge arm supports bringing the door closer to or farther from the cabinet, which helps align thick doors within minimal gaps while maintaining overlay. Height adjustment capability in the system allows vertical alignment of doors across a cabinet bank, keeping horizontal lines consistent on multi-door installations. The specified boring pattern of 40 mm interacts with the cup depth and edge distance range of 3 mm to 10 mm to create a consistent drilling geometry, which simplifies jig setup and leads to repeatable hinge placement from cabinet to cabinet. The 95 degree opening angle defines how far the door swings, which is useful when planning interior clearances or adjacent cabinet and wall conditions. The stamped steel arm and die-cast steel hinge cup in bright nickel finish combine to provide a solid mechanism that supports these adjustments while maintaining the concealed European hinge look.

Common Grass Nexis Hinge Installer Questions

Selecting This Nexis Hinge For Frameless Projects

The Grass Nexis self-close hinge with 95 degree opening angle, full overlay capability, and screw-on cup design serves frameless cabinet projects that use thicker profile doors and demand minimal gaps. Using the specified cup depth, drilling distances, and 40 mm boring pattern, installers can set up repeatable hinge locations that align with overlays up to 23 mm and door thickness up to 36 mm. The 3-dimensional adjustment and side-to-side range of plus 1 mm to minus 3 mm provide post-install tuning, so doors can be brought into line across the run. For projects using Grass mounting plates and planning for Grass soft-close devices, this Nexis hinge aligns with that hardware family, helping maintain consistency across the installation.