Grass Nexis 110 Degree Hinge For Full Overlay

Grass Nexis 110 degree hinge is a concealed cabinet hinge built for full overlay applications in face-frame or frameless cabinets, so it supports clean fronts while keeping hardware hidden. As a self-close hinge, it pulls the door shut at the end of travel, which helps doors stay closed without additional catches. The hinge belongs to the European concealed long arm hinge category, giving you familiar boring patterns and a proven layout for cabinet production. A cup depth of 11 mm on Nexis provides a standard drilling depth that works with typical 35 mm hinge-boring equipment. The hinge cup edge drilling distance of 3 mm to 7 mm offers flexibility to position doors for desired reveals. With boring patterns of 42 mm, 45 mm, and 48 mm, this hinge ties into common industry patterns, simplifying jig and CNC programming.

Key Nexis Hinge Details That Support Your Build

• The 3-dimensional adjustment on the Nexis hinge allows fine-tuning of side, depth, and height, helping align doors after installation when cabinet faces or doors are slightly out of true.
• A single screw side-to-side adjustment range of plus 1 mm to minus 3 mm lets you shift doors across the opening without reboring, saving time on final gapping.
• The doweled cup fastening design positions the hinge cup with factory-set dowel spacing, which speeds repetitive production work on multiple doors.
• Nexis hinges are compatible with Nexis hinge soft-closing adapters, so you can add soft-close function using the same hinge line when a project calls for quieter closing.
• Nexis hinges are designed to work with the Grass mounting plates, tying the hinge into a coordinated system that supports consistent overlay and door positioning across a run.

Mounting And Adjustment For Practical Cabinet Fit

The Nexis self-close full overlay hinge uses a doweled cup fastening design, so the hinge cup locates positively in pre-bored doors for repeatable alignment. The 3-dimensional adjustment feature provides controlled movement in height, side, and depth, letting you bring doors into plane after case installation. A single screw provides side-to-side adjustment from plus 1 mm to minus 3 mm, which is useful for dialing in reveals across multiple doors on a shared face frame or panel. The hinge is a European standard concealed long arm hinge, giving you a familiar motion and opening angle when working within 110 degrees of swing.

Using Nexis Hinges In Cabinet Projects

Where This Concealed Hinge Fits Best

The Grass Nexis self-close full overlay face-frame;frameless hinge is designed for use on both face-frame and frameless cabinet construction, so one hinge family can serve mixed shop work. As a concealed cabinet hinge, it tucks entirely inside the cabinet and door, which keeps kitchen, bath, or casework fronts visually clean. The 110 degree opening angle provides a full swing suitable for many base and wall cabinet layouts where a wider opening is not required. Cup depths of 11 mm on Nexis match common 35 mm boring setups, keeping door preparation consistent across production runs. The hinge cup edge drilling distance of 3 mm to 7 mm gives enough range to handle different overlays and door thicknesses while holding a solid bite in the door material.

Details That Support Repeatable Adjustment And Results

The Nexis hinge offers 3-dimensional adjustment, covering side, depth, and height, so doors can be tuned in all critical directions after the cabinet is hung. The single screw side-to-side adjustment of plus 1 mm to minus 3 mm provides precise lateral movement that helps line up reveals between adjacent doors without altering hinge locations. Boring patterns of 42 mm, 45 mm, and 48 mm integrate with standard European drilling layouts, reducing setup time when switching between projects that use different patterns. Screw-on and doweled Nexis hinges feature a stamped steel cup, giving a solid metal interface between the hinge and door for long-term attachment. The tool-less Impresso version uses a die-cast steel cup and closing flap with all metal construction, which provides a robust connection when a tool-less solution is preferred. Nexis hinges are compatible with Nexis hinge soft-closing adapters, allowing a transition to soft-close operation while keeping the same hinge geometry. Nexis hinges are designed to work with Grass mounting plates, creating a matched system where plate choice defines overlay and height while the hinge provides final adjustment.

Common Questions About Grass Nexis 110 Degree Hinge

Selecting This Nexis Hinge For Your Next Run

The Grass Nexis 110 degree self-close full overlay hinge with dowel fastening provides a concealed cabinet hinge solution that suits both face-frame and frameless work. With 3-dimensional adjustment, standard 11 mm cup depth, and support for 42 mm, 45 mm, and 48 mm boring patterns, it integrates into established European drilling practices. Nexis hinge compatibility with Nexis hinge soft-closing adapters and Grass mounting plates keeps hardware within one coordinated system. For cabinet runs needing full overlay, concealed hardware, and fine post-installation tuning, this Nexis hinge aligns well with production-focused workflows.