Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass Nexis self-close hinge brings half overlay geometry to CNC-ready production work, using pre-attached dowels that press straight into the door's bored holes on both face-frame and frameless cabinets.
In a production shop running CNC-bored doors, cup screws are a bottleneck. This hinge's dowel mount eliminates that step: the cup carries pre-attached dowels that press into the bored holes in the door face, locking the hinge in place without a screwdriver. The result is faster staging at the hinge station and fewer parts to track on the floor. The 35mm cup bores to 11.5mm deep, and the 42mm boring pattern is Grass Nexis-specific, so the CNC program needs to match. The arm then clips to a Grass Nexis base plate on the cabinet, which is a separate purchase matched to your cabinet construction and the overlay you need.
The hinge body is steel with a nickel finish. On a production run that mixes visible hardware, keeping the hinge finish consistent with pulls and catches matters to the finished look. The self-close spring is built into the hinge, so no add-on damper or closer is needed to get the door pulling shut on its own.
Half overlay is the geometry of choice wherever two doors meet on one cabinet partition, each covering roughly half the shared panel edge. It is also common on single-door cabinets where a partial overlay is specified rather than full coverage. This hinge suits cabinet shops and production millwork operations that bore doors on a CNC and want a fast, screwless cup attachment. It works on both frameless box construction and face-frame cabinets. For a project that needs a damped, cushioned close rather than a spring pull, look to the Nexis soft-close version of this hinge instead.
The function is the same once installed, but the installation motion differs. The dowels press into pre-bored holes in the door rather than being fastened with cup screws. This makes it faster on a CNC-equipped line where the dowel holes are already part of the boring program.
No. Use Grass Nexis plates. The arm engagement and boring pattern are Grass-specific, and plates from other brands will not connect to this hinge.
No. The base plate mounts to the cabinet and is sold separately. Select the Grass Nexis plate that matches your cabinet type and door position.
This is a self-close hinge: a spring pulls the door shut but does not cushion the final contact. A soft-close Nexis hinge uses a damper to slow the door over the last few degrees so it settles quietly. If the project spec calls for a quiet, cushioned close, choose the soft-close version.
Specify this hinge when the job calls for half overlay doors on a CNC boring program and you want the cup to drop in without screws.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF318.493.71.0615 Mfr# F061073239236 | Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 6mm |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF317.393.56.0815 Mfr# F060073159236 | Nexis 2-Piece Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, for Euro Screws, 8mm | ||||
Sold in: 1 Each |  GF318.493.71.0815 Mfr# F061073240236 | Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 8mm | ||||
Sold in: 1 Each |  GF314.493.70.0815 Mfr# F061073218236 | Nexis Cam Adjustable Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 8mm | ||||
Sold in: 1 Each |  GF315.393.55.0815 Mfr# F060073152236 | Nexis Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 8mm | ||||
Sold in: 1 Each |  GF314.493.71.0815 Mfr# F061073223236 | Nexis Two Cam Frameless Base Plate with 2 Adjustment Points Open Hole for Wood Screws Die-Cast Zinc 8mm Height |
