Nexis Hinge 110D Full Overlay Screw-On Use

Nexis hinge 110D full overlay screw-on is a concealed cabinet hinge from Grass Nexis that provides 110 degree opening, so doors swing wide enough for cabinet access while keeping the hardware hidden. As part of the Grass Nexis 110 degree hinge family, it is positioned as a cabinet hinge that will meet project requirements, which suits a broad range of cabinet builds. The hinge belongs to the concealed cabinet hinges class, so it keeps face frames and door fronts visually clean. Being a European concealed long arm hinge, it supports modern frameless and face-frame layouts where a full overlay look is required. The hinge is offered with a nickel finish, which gives a neutral metal appearance that coordinates with typical cabinet hardware. As a Grass America product, it fits into established shop standards where Grass components are already used.

Key Nexis Hinge Details For Cabinet Work

• The 110 degree opening angle lets the door clear the cabinet front more fully, which helps when accessing interior storage and reduces interference in everyday use.
• The hinge is described as a full overlay option, so the door can cover most of the cabinet front, creating a continuous face that suits contemporary layouts.
• As a European concealed long arm hinge in the concealed cabinet hinges class, it mounts inside the cabinet space, leaving the exterior surfaces uninterrupted for a clean finished look.
• The nickel finish on the hinge provides a consistent metallic surface that visually matches other nickel-tone hardware in the same project.
• The hinge is part of the Grass Nexis line from Grass America, so it can be specified alongside other Nexis components under a single manufacturer reference.

Installation And Cup Mounting Characteristics

This Nexis hinge uses a screw-on cup fastening design that attaches to the door with two #6 x 5/8 inch screws, which gives a straightforward mechanical connection for drill-and-drive workflows. The hinge cup works with a cup depth of 11 mm in the Nexis version, so boring operations can be planned around that dimension for repeatable door preparation. A hinge cup edge drilling distance of 3 mm to 7 mm is supported, which lets installers position the cup closer or further from the edge while staying within the recommended range. The product also supports boring patterns of 42 mm, 45 mm and 48 mm, so shops using different line-boring or hinge-boring jigs can align to one of these centers.

How This Grass Nexis Hinge Performs In Use

Applications In Face-Frame And Frameless Cabinets

The product is identified as a Grass Nexis self-close full overlay face-frame and frameless hinge, so it is intended for both face-frame and frameless cabinet construction where a full overlay door layout is desired. Being a concealed cabinet hinge, it sits inside the cabinet and door interface, so the mounting hardware is hidden when the door is closed. The hinge belongs to the European concealed long arm hinges category, which is commonly used on full overlay doors that need clear swing and stable support. Nexis hinges are designed to work with Grass mounting plates, so this hinge can be paired with compatible Grass plates to create the full door mounting system across a run of cabinets. Nexis hinges are also compatible with Nexis hinge soft-closing adapters, so soft-closing behavior can be added using the corresponding adapter when a quieter or more controlled close is desired.

Adjustment, Construction, And Repeatable Results

The hinge offers 3-dimensional adjustment, covering side, depth, and height, so installers can fine-tune door position after mounting to achieve consistent reveals and alignment. A single screw side-to-side adjustment of plus 1 mm to minus 3 mm is specified, which gives room to shift the door to correct small layout variations without redrilling. Screw-on hinges in the Nexis line feature a stamped steel cup, so the cup provides a metal seating surface in the door for stable support during repeated opening and closing. Tool-less Impresso versions use a die-cast steel cup and closing flap with all metal construction for positive and secure attachment to the cabinet door, which demonstrates the line's focus on solid metal interfaces where the door connects to the hinge. The Nexis hinge 110D full OL screw-on is identified with manufacturer part number F015072632236, so shops can reorder or reference the same hinge consistently across projects. Grass Nexis 110 degree hinges are described as meeting project requirements, which indicates they are positioned for general cabinet work where standard concealed hinge performance is needed.

Common Grass Nexis Hinge Questions Answered

Selecting This Hinge For Your Cabinet Run

The Nexis hinge 110D full overlay screw-on combines 110 degree opening, 11 mm cup depth, and 3 mm to 7 mm edge drilling distance, so it aligns with common boring and overlay setups. Its 3-dimensional adjustment with single screw side-to-side movement from plus 1 mm to minus 3 mm supports precise door alignment on installed cabinets. As a Grass Nexis concealed cabinet hinge designed to work with Grass mounting plates and compatible with Nexis hinge soft-closing adapters, it fits into a coordinated Grass hardware system for consistent cabinet builds.