
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
The Grass Nexis is a self-close concealed hinge for full overlay doors on both face-frame and frameless cabinets, finished in nickel and mounted with a direct screw-on connection.
This hinge is built for full overlay doors: the door rides on a straight arm and covers nearly the whole cabinet side when closed, with only a narrow reveal at the edge. The 35mm cup bores into the back of the door and the arm connects to a base plate on the cabinet, which is ordered separately. The Nexis is Grass's value-oriented concealed line, and the screw-on arm engagement means the connection is locked down with screws rather than a tool-free clip, which suits shops and contractors who prefer a mechanically fixed joint. The self-close spring pulls the door shut from a few degrees open. This is a spring pull, not a soft-close damper, so the door closes firmly rather than settling quietly.
The hinge body is steel with a nickel finish, a clean look that reads well on frameless interior panels and face-frame stiles alike. One point to confirm before specifying for replacements or multi-brand installs: the Nexis uses a 42mm boring pattern rather than the 45mm spacing found on most other concealed hinges. That measurement is Grass-specific, so existing holes bored for another brand's pattern may not align. New construction or a full Grass install runs straight through without issue.
The Nexis screw-on suits cabinet shops running production work on frameless boxes, contractors setting face-frame kitchens, and remodelers replacing hinges within an existing Grass installation. The screw-on arm is the right call when a tool-free clip is not required and a locked-down mechanical connection is preferred. For full overlay doors that need a cushioned, quiet close instead of a spring pull, a soft-close version of the Nexis is the better choice. For doors thicker than 22mm, a thick-door hinge is the correct fit.
No. The hinge arm connects to a base plate that mounts to the cabinet, and the plate is sold separately. Use Grass Nexis plates, since plates are brand-specific and a plate from another brand will not connect to this hinge.
With screw-on, the arm locks to the plate using screws, which means removing a door requires a screwdriver. Clip-on or snap-on arms disengage without tools. Screw-on is the more fixed connection of the two.
It depends on what is already in the door. The Nexis uses 42mm hole spacing, while many other concealed hinges use 45mm. If the existing doors were bored for 45mm, the holes will not line up with this hinge. For a clean swap, confirm the boring pattern in the existing door before ordering.
The self-close spring activates over the last few degrees of travel, pulling the door shut when it is nearly closed. It does not affect the door when it is held open at a wider angle.
When the job calls for full overlay doors that close on their own and a screw-on connection that stays put, the Grass Nexis in nickel delivers a straightforward, production-proven solution for face-frame and frameless cabinets alike.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GF318.493.71.0615 Mfr# F061073239236 | Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 6mm |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 30000 Each | WW54400 Mfr# 367000042096130000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 367000042096130000 - 30000/Box | ||||
Sold in: 1000 Each | WW41900 Mfr# 3670000121961 1000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000121961 1000 - 1000/Box | ||||
Sold in: 100 Each | BP606N100 Mfr# 606N-100 | Blum #6 x 5/8" Flat Head Wood Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 28004573 - 100/Box |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GF317.393.56.0815 Mfr# F060073159236 | Nexis 2-Piece Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, for Euro Screws, 8mm | ||||
Sold in: 1 Each | GF318.493.71.0815 Mfr# F061073240236 | Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 8mm | ||||
Sold in: 1 Each | GF314.493.70.0815 Mfr# F061073218236 | Nexis Cam Adjustable Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 8mm | ||||
Sold in: 1 Each | GF315.393.55.0815 Mfr# F060073152236 | Nexis Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 8mm | ||||
Sold in: 1 Each | GF314.493.71.0815 Mfr# F061073223236 | Nexis Two Cam Frameless Base Plate with 2 Adjustment Points Open Hole for Wood Screws Die-Cast Zinc 8mm Height |
Sold In: 1 Each