Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Grass Nexis Impresso is a concealed long-arm European hinge built for full overlay doors on both face-frame and frameless cabinets, with toolless arm engagement and a self-close spring that pulls the door shut automatically.
On a run of frameless kitchen uppers or a set of face-frame pantry doors, the difference between screwing each arm on individually and snapping it into place adds up fast. The Nexis Impresso's toolless connection lets the arm engage the base plate in one motion, and release the same way when a door needs to come down for adjustment or finishing. That clip-in, clip-out cycle is where this hinge pays back on installs with door counts in the dozens.
The 35mm cup bores into the back of the door in the standard position. The arm then clips to a Grass Nexis base plate mounted to the cabinet side or frame stile. That base plate is a separate purchase, matched to your cabinet construction and the overlay position you need. Use Grass Nexis plates only: plate geometry and arm engagement are specific to this system and not interchangeable with other brands.
The hinge body and arm are steel, plated in a Nickel finish that holds up through daily open-and-close cycles without tarnishing or wearing through at contact points. The self-close spring is integrated, so there are no add-on dampers or clips to source separately for this closing function. Because this is a self-close rather than a soft-close hinge, the door pulls shut firmly rather than settling in with a cushioned deceleration. For projects where a damped, quiet close is the specification, the soft-close variant of this Nexis series is the right move.
Cabinet shops running production on face-frame boxes, contractors working frameless kitchen installs, and remodelers hanging replacement doors on existing cabinetry all have a use for this hinge. The 48mm boring pattern is the spec to confirm before ordering for replacements: this hinge uses a 48mm hole spacing rather than the more common 45mm pattern, so it is not a drop-in match for every existing layout. New builds bore to spec; replacements should measure the existing hole spacing first.
Standard 16 to 22mm door thickness is the range this hinge is designed for. Doors outside that window need a thick-door or thin-door variant.
Yes. The hinge arm clips to a base plate that mounts to the cabinet, and that plate is sold separately. Choose a Grass Nexis plate matched to your cabinet type and the overlay position you need.
No. Self-close uses a spring to pull the door shut over the last few degrees of travel. Soft-close uses a damper to slow the door so it does not slam. This hinge pulls the door closed; it does not cushion the close. For a damped close, choose the soft-close version of this Nexis series.
This hinge uses a 48mm hole spacing. If your existing doors were bored for a 45mm pattern, this hinge will not drop in without re-boring. Measure the center-to-center distance between the two small screw holes beside the cup before ordering for a replacement job.
Yes. The hinge works on both cabinet types when paired with the correct Grass Nexis base plate for each application. The plate selection is what changes between the two constructions, not the hinge itself.
Specify the Nexis Impresso when full overlay doors need to go up quickly and stay in place reliably, across face-frame and frameless boxes alike.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF318.493.71.0615 Mfr# F061073239236 | Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 6mm |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF317.393.56.0815 Mfr# F060073159236 | Nexis 2-Piece Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, for Euro Screws, 8mm | ||||
Sold in: 1 Each |  GF318.493.71.0815 Mfr# F061073240236 | Nexis 2-D Cam Adjustable Wing Mounting Plate, 2-Point Fixing, Nickel-Plated, with Pre-Mounted Euro-Screws, 8mm | ||||
Sold in: 1 Each |  GF314.493.70.0815 Mfr# F061073218236 | Nexis Cam Adjustable Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 8mm | ||||
Sold in: 1 Each |  GF315.393.55.0815 Mfr# F060073152236 | Nexis Adjustable Wing Mounting Plate, 3-Point Fixing, Nickel-Plated, Screw-On, 8mm | ||||
Sold in: 1 Each |  GF314.493.71.0815 Mfr# F061073223236 | Nexis Two Cam Frameless Base Plate with 2 Adjustment Points Open Hole for Wood Screws Die-Cast Zinc 8mm Height |
