Grass Nexis 110 Degree Hinges For Cabinet Projects

Grass Nexis 110 degree hinges give you a concealed cabinet hinge solution in the Grass America line that fits European standard hinge layouts while keeping the hardware hidden when the door is closed. This model is a Nexis Impresso self-close half overlay hinge for face-frame or frameless cabinets, so it supports common cabinet construction styles with the same core hinge family. The hinge belongs to the concealed cabinet hinges category, which keeps the hinge arm out of sight and helps finished work look clean in kitchens, baths, or shop projects. A 110 degree opening angle lets doors open wide enough for comfortable access to the cabinet interior while still controlling the swing in tight runs. For installers and serious DIY users working with Grass Nexis hardware, this hinge keeps projects within a single, consistent system.

Key Nexis Impresso Details That Support Builds

• Grass Nexis 110 degree hinges feature 3-dimensional adjustment in side, depth, and height, so you can fine-tune gaps and reveals after the doors are hung to dial in an even, professional look without re-boring.
• Cup depths of 11 mm for Nexis and 11.5 mm for Nexis Impresso give you clear boring depth targets, which helps avoid break-through on thinner doors and keeps hinge cups seated solidly in the panel.
• A hinge cup edge drilling distance of 3 mm to 7 mm supports standard European boring patterns, making layout straightforward when using line-boring equipment or jigs already set for typical distances.
• Single screw side-to-side adjustment of plus 1 mm to minus 3 mm lets you correct minor drilling or mounting variances, so doors can be shifted laterally to align across a run without pulling the hinge.
• Boring patterns of 42 mm, 45 mm, and 48 mm match common system hole spacing, which simplifies working across different cabinet lines while staying within the Grass Nexis hinge program.
• Available cup fastening designs of screw-on with #6 x 5/8 inch screws, doweled, and toolless Impresso allow you to choose the attachment style that fits your shop workflow and preferred production method.

Installation And Adjustment For Nexis 110 Degree Hinges

This Nexis Impresso toolless hinge uses a die-cast steel cup and closing flap construction, so the hinge body locks into the door with an all-metal connection that supports repeated use in high-traffic cabinets. The single screw side-to-side adjustment of plus 1 mm to minus 3 mm gives you quick correction on site, turning small drilling offsets into precise reveals without changing the hinge cup location. Cup depths of 11 mm and 11.5 mm set clear drill depth requirements, which helps reduce blowout on the face of the door during production. With a hinge cup edge distance between 3 mm and 7 mm and boring patterns at 42 mm, 45 mm, and 48 mm, the hinge drops into typical European cabinet boring layouts used by many shops.

Using Nexis Impresso Hinges In Cabinet Systems

Where Grass Nexis Half Overlay Hinges Fit Best

The Grass Nexis Impresso self-close half overlay hinge is designed as part of the Nexis concealed hinge system, so it integrates into cabinets that already follow European standard hinge practices. The half overlay configuration works with both face-frame and frameless cabinets, allowing you to run a consistent hinge style whether the job calls for traditional frames or contemporary boxes. Because Nexis hinges are designed to work with Grass mounting plates, this hinge pairs with that mounting hardware to create a complete door-mounting point on the cabinet. Nexis hinges are also compatible with Nexis hinge soft-closing adapters, so projects using this hinge can add soft-closing behavior within the same Grass platform when the application calls for controlled door closing.

Details That Help Repeatable Hinge Alignment

The 3-dimensional adjustment built into Grass Nexis 110 degree hinges gives side, depth, and height tuning, so doors can be aligned across tall banks of cabinets after installation for consistent reveals. Single screw side-to-side adjustment of plus 1 mm to minus 3 mm lets you shift doors laterally without disturbing depth or height, which helps speed up fine-alignment at the end of a job. Cup depths of 11 mm on Nexis and 11.5 mm on Nexis Impresso provide predictable boring for repeat runs, keeping hinge seating depth consistent from door to door. A hinge cup edge drilling distance range from 3 mm to 7 mm, combined with boring patterns at 42 mm, 45 mm, and 48 mm, aligns with common drilling equipment settings, so operators can keep standard jigs in place while moving between cabinet lines. The toolless Impresso cup fastening design uses a die-cast steel cup and closing flap with all-metal construction, which supports a secure attachment to the cabinet door while also helping speed repetitive production steps in shop environments.

Common Nexis Impresso Half Overlay Hinge Questions

Selecting This Nexis Hinge For Your Next Job

Grass Nexis 110 degree hinges with the Nexis Impresso toolless cup offer a concealed cabinet hinge option that fits European standard hinge practices while supporting face-frame and frameless layouts. With 3-dimensional adjustment, defined boring patterns, and compatibility with Grass mounting plates and Nexis hinge soft-closing adapters, this hinge aligns well with shop workflows using Grass hardware. For cabinet runs that benefit from half overlay doors and controlled self-closing action, this Nexis concealed cabinet hinge provides a consistent hardware choice across multiple projects.