Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
1-1/16 inch diameter closet rod flange from Knape and Vogt is designed for 1-1/16 inch closet tubing, so it matches common rod stock and helps keep layout straightforward on new or retrofit closet runs. The flange is described as adjustable, which allows position tuning at the mounting point so the rod seats correctly when walls or pilasters are slightly off. The part is identified as KV 757 ANO, giving installers a precise reference when matching drawings or reordering for repeat jobs. This flange belongs to the Closet Rods and Flanges product class, so it is built specifically as a support interface between closet rods and vertical or horizontal structures. The Knape and Vogt brand connection ties this part into the wider KV233 and KV255 series pilaster system, making it a familiar choice on closet and shelving projects that already use those components.
This adjustable flange is sized at 1-1/4 inch wide by 1-1/2 inch high by 3/4 inch deep, so it sits neatly on KV233 and KV255 series pilasters without crowding adjacent hardware. Because it is built for 1-1/16 inch closet tubing, installers can cut rod lengths to standard dimensions and expect a consistent fit at each end. The anochrome finish presents a uniform metallic surface, which helps the flange visually integrate with matching KV closet components on multi-bay installations. The adjustable nature of the flange allows minor tweaks at the mounting point so rods align from left to right, reducing rework when walls or pilasters vary slightly. Using the specific 757 ANO part number simplifies ordering the same flange across multiple closets in a project.
The 757 ANO adjustable flange is intended for use with KV233 and KV255 series pilasters, so it fits cleanly into closet systems based on those vertical standards. Because it is designed for 1-1/16 inch closet tubing, it matches common round closet rods used in residential and light commercial storage. The compact 1-1/4 inch by 1-1/2 inch by 3/4 inch body dimensions keep the hardware tight to the pilaster face, which is helpful when rods run close to side panels or opposing walls. The anochrome finish provides a neutral metallic tone, allowing the flange to coordinate with typical KV closet tubing and shelf supports in the same finish family. With its defined part number 757 ANO, this piece is easy to specify on drawings wherever a 1-1/16 inch rod terminates at a KV233 or KV255 pilaster upright.
The flange is described as adjustable, giving installers some flexibility when locating the rod seat relative to the pilaster. That adjustability helps compensate when pilasters are not perfectly parallel or when field conditions shift a vertical slightly, so the 1-1/16 inch closet tubing still lands level between supports. Because the flange interfaces directly with KV233 and KV255 series pilasters, once one position is dialed in, additional flanges can follow the same layout along the run, supporting consistent rod height bay to bay. The dedicated 1-1/16 inch tubing design helps rods sit correctly in the flange without excessive play, which is important when multiple rods need to track in a straight line. Combining the defined body size of 1-1/4 inch wide by 1-1/2 inch high by 3/4 inch deep with the anochrome finish also means installed flanges line up visually, supporting a uniform, repeatable look across a full closet wall.
The 757 ANO adjustable flange is designed for 1-1/16 inch closet tubing, so it supports standard 1-1/16 inch round rods used in many closet layouts.
This Knape and Vogt flange is for use with KV233 and KV255 series pilasters, so it mounts to those uprights and positions the 1-1/16 inch rod at the correct height.
The adjustable flange measures 1-1/4 inch wide by 1-1/2 inch high by 3/4 inch deep, which keeps the mounting footprint compact on the pilaster face.
The anochrome finish gives the flange a neutral metallic appearance, helping it visually blend with typical Knape and Vogt closet tubing and shelf hardware.
The 757 ANO designation is the Knape and Vogt part number for this adjustable flange, helping specifiers and installers match it accurately on plans and orders.
The adjustable flange allows small position changes at the mounting point so 1-1/16 inch closet rods align level between KV233 or KV255 pilasters.
The Knape and Vogt 757 ANO adjustable flange ties directly to KV233 and KV255 series pilasters and is designed for 1-1/16 inch closet tubing, making it a focused choice when planning or repeating KV-based closet runs. Its compact 1-1/4 inch by 1-1/2 inch by 3/4 inch body and anochrome finish support a tidy, uniform look across multiple rod positions. For projects centered on 1-1/16 inch tubing in KV pilaster systems, this flange offers a clearly identified connection point backed by the Knape and Vogt brand.
Sold In: 1 Each
