
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
KV255 aluminum pilaster standard 48 inch is a Knape and Vogt KV255 shelf standard in 48 inch length that supports adjustable shelving layouts, so cabinet and closet runs can be set up to match the project dimensions. The standard is made from 17-gauge aluminum, giving it a high-strength profile that handles heavier everyday loads in closet, cabinet, and storage builds. Its natural aluminum finish presents a neutral, clean look that blends into most shop-built casework, so the focus stays on doors and fronts during installation. The profile measures 5/8 inch wide by 3/16 inch deep, so it nests cleanly into narrow stile spaces or shallow cabinet sides without requiring deep dados. As part of the KV255 line, this standard ties into a familiar Knape and Vogt system many shops already use, supporting consistent layouts from one job to the next.
This KV Model KV255 48 inch standard installs using pre-drilled screw or nail holes set 6 inches on center, so fastening follows a predictable pattern up the cabinet side or closet panel. The 5/8 inch width gives a narrow footprint that seats easily along a stile or case side, reducing layout time when spacing multiple standards. With slots adjustable in 1/2 inch increments, shelf supports can be positioned precisely to clear hinges, drawers, and hardware, keeping the interior layout flexible without reworking the case. Stamped numbers along the slots help replicate the same shelf position on facing standards, which supports level shelves and consistent reveals across doors and openings. Recommended fasteners are KV255-8 nails (sold separately), which align to the hole pattern and help secure the standard to typical cabinet or closet substrates.
The 255AL 48 designation identifies a 48 inch aluminum standard in the KV255 family, which suits tall cabinets, pantry units, and full-height closet sections where multiple shelf levels are needed. Its 17-gauge aluminum construction provides a strong yet relatively light standard, useful when installing several standards per opening in shop-built casework. The 5/8 inch wide by 3/16 inch deep profile fits well in cabinet sides that do not have excess thickness, allowing the builder to maintain interior width while still adding adjustable shelving. BHMA Grade 1 compliance means the standard is designed for demanding service, supporting use in garage storage, utility rooms, and other heavy-use areas where shelves carry frequent load changes. The natural aluminum finish complements other aluminum components and neutral interiors, helping installations look consistent across mixed cabinet runs.
The KV255 pattern of 1/2 inch slot increments lets installers repeat shelf positions across different cabinets using the same measurement steps, which helps keep hardware lines straight in large runs. Stamped numbers next to the slots act as fixed reference points, so a shop can record specific numbers for standard layouts and repeat them on future jobs without re-measuring. Pre-drilled holes 6 inches on center define fastening locations, reducing layout tasks when drilling or nailing through various substrates. Using the recommended KV255-8 nails (sold separately) ties fastener choice directly to the hole design, which supports consistent holding power along the full height. Because the standard is part of a broader KV255 system with multiple lengths and finishes, a shop can standardize on one slot pattern while matching different cabinet heights, simplifying drawing details and jobsite adjustments.
The 255AL 48 standard measures 5/8 inch wide by 3/16 inch deep and 48 inches long, so it fits slim cabinet sides while covering common full-height shelf layouts.
The standard uses 1/2 inch slot increments, letting you move shelf supports in small steps so shelf heights can clear hinges, drawers, and stored items without redesigning the case.
Stamped numbers identify slot positions along the standard, helping you match shelf locations on opposing standards and maintain level lines across cabinets.
The standard has pre-drilled screw or nail holes spaced 6 inches on center, providing a consistent fastening pattern from top to bottom for secure mounting.
This version uses 17-gauge aluminum, giving a high-strength but manageable profile that supports heavier storage while keeping installation handling straightforward.
BHMA Grade 1 compliant construction indicates a heavy-duty standard intended for demanding service, supporting use in busy storage areas and frequent shelf adjustment.
The 48 inch KV255 heavy-duty aluminum pilaster standard in natural aluminum finish combines 17-gauge aluminum construction with 1/2 inch adjustable slots and stamped numbers, giving shops a repeatable system for cabinet, closet, and storage layouts. Its 5/8 inch wide by 3/16 inch deep profile and pre-drilled 6 inch on-center fastening pattern keep installation predictable across different substrates. Selecting this 255AL 48 standard lets you align multiple cabinet heights and shelf positions to one familiar Knape and Vogt KV255 format, simplifying design, machining, and on-site adjustments across future projects.
Sold In: 1 Each