Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
96" KV255 heavy-duty steel pilaster defines a full-height Knape and Vogt shelf standard that supports adjustable shelving along tall cabinet, closet, or storage runs. The 96 inch length spans long vertical panels, which helps keep support spacing consistent from floor to near ceiling in many built-ins. The 5/8 inch wide by 3/16 inch deep profile provides a slim standard that seats into narrow panel spaces, useful where material thickness is tight or face reveals are critical. Steel standards in 23-gauge high strength steel provide a rigid track for brackets, supporting repeated shelf moves over time. The brass look finish gives a warm, hardware-style appearance that blends with brass-toned hinges or rods in closet and cabinet interiors. Knape and Vogt model KV255 and manufacturer part 255 BR 96 identify this as part of a known standard-and-bracket system, simplifying reorders or matching across multiple projects.
Knape and Vogt steel standards in this KV255 series are fabricated from 23-gauge high strength steel, giving a sturdy base for shelf brackets while keeping the profile slim against the panel. The brass look finish allows the visible edge of the standard to coordinate with brass-tone closet rods, pulls, or other trim in open cabinetry. Pre-drilled screw or nail holes on 6 inch centers mean the fastener pattern is already laid out, so the installer can follow a regular spacing grid down the panel height. Recommended fasteners, listed as KV255-8 nails, define a known fastening option for driving through these holes into wood substrates. The 1/2 inch slot increments along the standard create a predictable ladder of shelf locations, which supports consistent spacing when lining up multiple standards across a multi-bay installation.
The 96 inch KV255 shelf standard length works well in tall closets, utility cabinets, or storage walls where one continuous vertical run is preferred over stacking shorter sections. Its 5/8 inch width allows mounting on cabinet sides without stealing much interior width, important when maximizing usable shelf area. The 3/16 inch depth keeps the standard relatively shallow, which helps in face-frame cabinets or built-ins where the standard must sit close to the interior surface. The brass look finish supports use in projects that feature brass-toned closet poles, decorative hooks, or hardware, so the standard visually blends into the overall design. Being a Knape and Vogt KV255 model places it within a recognized shelf standards and brackets category, helpful when coordinating with compatible brackets designated for this series.
BHMA Grade 1 compliant performance signals that the KV255 pilaster standard has been built to a defined commercial-grade benchmark, important for installations that expect long-term use and regular shelf repositioning. Slots set at 1/2 inch increments allow shelves to move in relatively small steps, which lets installers fine-tune heights for clothing, bins, or equipment without being locked into coarse spacing. Stamped numbers beside the slots make it easier to match corresponding positions across multiple standards, reducing the chance of out-of-level shelves when working quickly on repetitive bays. The pre-drilled holes every 6 inches on center offer evenly distributed fastening points, which helps spread load into the cabinet side or wall structure. The 23-gauge high strength steel material provides a stable channel for brackets as loads shift, supporting repeated bracket removal and reinsertion during layout changes.
The product is described as KV Model KV255 and manufacturer part 255 BR 96, which ties it to Knape and Vogt's KV255 shelf standards and brackets product class.
The Knape and Vogt 255 BR 96 standard is 96 inches long, allowing coverage from low to high shelf positions on tall cabinet or closet side panels.
The KV255 standard has a 5/8 inch wide by 3/16 inch deep profile, which supports slim installations along cabinet or closet sides while maintaining interior shelf width.
This brass look pilaster is a steel standard made from 23-gauge high strength steel, providing a rigid track for shelf supports in closet or cabinet applications.
Shelf height changes use slots that are adjustable in 1/2 inch increments, giving small step adjustments to align shelves to stored items or match across multiple bays.
The pre-drilled screw or nail holes are 6 inches apart on center, providing a consistent fastening layout down the length of the standard during cabinet or closet installation.
This 96 inch KV255 heavy-duty steel pilaster standard from Knape and Vogt combines a tall length, 5/8 inch slim width, and 3/16 inch depth to support adjustable shelving in high cabinet or closet applications. The brass look finish coordinates with brass-toned interiors, while BHMA Grade 1 compliant 23-gauge high strength steel construction supports demanding storage environments. With 1/2 inch slot increments, stamped numbers, and pre-drilled holes 6 inches on center, this 255 BR 96 model suits installers needing predictable layout, straightforward fastening, and repeatable shelf alignment along full-height panels.
Sold In: 1 Each
