Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
KV255 heavy duty steel pilaster gives you a 12 inch Knape and Vogt shelf standard designed for adjustable shelving runs in cabinets, closets, or storage frames. The standard measures 5/8 inch wide by 3/16 inch deep, so it sits close to the side panel while still providing enough bearing for shelf supports. Slots for supports are adjustable in 1/2 inch increments, which lets you fine-tune shelf height without over-committing to fixed locations during layout. This 12 inch length works well in shorter cabinets where you want usable adjustment without running past the cabinet face or toe space. BHMA Grade 1 compliant construction supports demanding use in shelving applications where repeated repositioning is common. The almond finish provides a neutral tone that blends with many light-colored interiors while still making stamped numbers readable during layout.
The 5/8 inch wide face and 3/16 inch deep section make this standard straightforward to mount along cabinet sides or vertical supports. Pre-drilled screw or nail holes spaced 6 inches on center give a consistent pattern to follow when driving fasteners into wood or similar substrates. The product is described with recommended fasteners KV255-8 nails sold separately, so it is intended to work with nails sized and shaped for these holes. Slots adjustable in 1/2 inch increments help during mounting because you can reference the same stamped numbers at each location to keep all standards aligned and parallel. This 12 inch length is easy to position in tight cabinet spaces where longer standards could conflict with existing framing.
The KV255 model in a 12 inch length suits shorter casework, small closets, and utility cabinets where only a few adjustable shelf positions are needed. The almond finish on this 255AL 12 pilaster standard offers a light, neutral color that matches many prefinished interiors and helps it blend behind shelf contents. Because the standard is 5/8 inch wide, it fits comfortably on narrow cabinet sides while leaving room for shelf pins or brackets to seat fully within the adjustable slots. The 3/16 inch depth keeps projection modest, so shelf edges can sit near the cabinet wall without large gaps. With slots adjustable in 1/2 inch increments, installers can set shelves to align across multiple cabinets, maintaining consistent height lines through a room.
BHMA Grade 1 compliant construction means this shelf standard is designed for performance levels used in demanding environments, which matters when shelves are moved frequently or loaded heavily. The stamped numbers along the KV255 heavy duty steel pilaster act as a built-in index, letting installers and facility staff return shelves to known positions without measuring tape. Pre-drilled screw or nail holes 6 inches apart on center define regular fastening points, which supports a consistent installation pattern along tall runs or across multiple cabinets. The narrow 5/8 inch width combined with 3/16 inch depth helps maintain a clean interior line, so bracket engagement is predictable along the full 12 inch height. Slots that accept supports every 1/2 inch give fine-grain control over ergonomics, allowing shelves to be located where contents can be accessed comfortably.
The 255AL 12 pilaster standard is 12 inches long and has a profile that is 5/8 inch wide by 3/16 inch deep, which helps it fit neatly along cabinet sides.
The slots adjustable in 1/2 inch increments let you position shelves with fine spacing, so you can match heights across multiple standards and fit contents without large wasted gaps.
BHMA Grade 1 compliant design indicates a construction level for demanding use, which is important where shelves may be frequently adjusted or heavily loaded in service.
Pre-drilled screw or nail holes spaced 6 inches on center give clear fastening points, helping maintain alignment and saving layout time on repetitive installations.
The almond finish offers a light, neutral color that coordinates with many interiors, while still allowing the stamped numbers on the standard to remain visible during setup.
The 12 inch length suits shorter cabinets or sections where only a few adjustable positions are needed, avoiding interference with cabinet bases or upper framing.
This KV255 heavy duty steel pilaster in almond finish combines a 12 inch length with 5/8 inch by 3/16 inch dimensions, 1/2 inch increment slots, and BHMA Grade 1 compliant construction. Those details support adjustable shelving layouts in smaller cabinets and storage units where precise spacing and repeatable positioning matter. When a project calls for a neutral-finished Knape and Vogt shelf standard sized for compact vertical runs, this 255AL 12 pilaster offers the dimensions and adjustment pattern already matched to that role.
Sold In: 1 Each
